HP 3PAR StoreServ 7450 2-node HP 3PAR StoreServ 7450 Storage Site Planning Man - Page 11
Power and Heat Specifications, Table 2 Capacity Specifications, Table 3 Power Requirements
View all HP 3PAR StoreServ 7450 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
NOTE: The SSDs have a limited number of writes that occurs before reaching its write-endurance limit. The manufacturer generally sets a high write-endurance limit to endure degradation caused by various input/output processes and workloads over a period of time. The HP 3PAR StoreServ Storage system tracks all writes to the SSDs and reports the total percentage of write-endurance limit used by system. The constant performance monitoring provides the ability to early detect any SSDs approaching its limit and replace them before they become fully degraded. The SSD reaches its maximum usage limit when it exceeds the write-endurance limit. Any SSDs exceeding the maximum usage limit during the product warranty period will not be repaired or replaced under HP Support contracts. Table 2 Capacity Specifications Feature Number of controller nodes Control cache Data cache Host ports 10 Gb/s iSCSI host ports Fibre Channel host ports1 Number of drives 1 Raw capacity (approximately) 1 RAID levels RAID 5 data to parity ratios Minimum physical drives to create RAID 5 volume: 8 7450 (Two Nodes) 2 16GB 16GB 4-12 0-4 4-12 6-240 1.2TB to 432TB RAID 0, 1, 5, 6 2:1 - 8:1 7450 (Four Nodes) 4 32GB 32GB 8-24 0-8 8-24 12-480 2.4TB to 864TB RAID 0, 1, 5, 6 2:1 - 8:1 RAID 6 data to parity ratios Base RAID sets: 12 drives Minimum physical drives to create RAID 6 volume: 12 4:2; 6:2; 8:2; 10:2; 14:2 4:2; 6:2; 8:2; 10:2; 14:2 Drive capacities (in approximate GB)1 100GB SSD, 200GB SSD, 400GB SSD Number of drive enclosures2 100GB SSD, 200GB SSD, 400GB SSD HP M6720 (4U24)/DC1 0-9 0-18 HP M6710 (2U24)/DC2 0-9 0-18 1 Levels, ratios, and capacities are all mixable within the same storage system. 1 GB=1,000,000,000 bytes. 2 A single drive enclosure holds up to 24 drives in both 4U and 2U chassis within an EIA-standard rack. Power and Heat Specifications The following table lists the electrical power requirements. Table 3 Power Requirements Component Node Pair, no drives, no add-on host adapters 4-port 8 Gb/s Fibre Channel Adapter Idle (watts/BTU/hr) 236 W / 803 24 W / 81.72 Transactional (watts/BTU/hr) 398 W / 1357 32.6 / 111 Power and Heat Specifications 11