HP 4000/6000/8000 HP StorageWorks 4000/6000/8000 Enterprise Virtual Array Conn - Page 6

Operating constraints, Required patches, Switch support, Multiple-path support

Page 6 highlights

Table 2 lists the supported Sun Solaris platforms. Table 2 Supported platforms Platform Model number Sun Fire Enterprise V120 V210 V240 V440 V490 V890 280R V480 V880 V1280 4800 4810 6800 12K 15K E2900 E4900 E6900 V20z (Solaris 10 x64/x86 only) V40z (Solaris 10 x64/x86 only) E220R E420R E250 E450 E3000 E3500 E4000 E4500 E5000 E5500 E6000 E6500 E10000 HP x86 Proliant (Solaris 10 only) DL145 DL145 G2 DL385 DL585 Required patches This release was tested with the current Sun Solaris patches installed. For the latest patch information, see the Secure Path for Sun Solaris specifications at this web site: http://h18066.www1.hp.com/products/storageworks/enterprise/specification.html WARNING! Do not neglect the required patches. Your system will not function properly without them. Switch support This release supports the Fibre Channel switches and firmware versions listed in the HP StorageWorks SAN design reference guide, which can be downloaded from the following web site: http://h18004.www1.hp.com/products/storageworks/san/documentation.html NOTE: HP recommends that you do not mix switch firmware versions in your SAN. It is considered a best practice to uniformly upgrade all switches in the SAN. Multiple-path support Sun Solaris with EVA storage requires either Sun Solaris MPxIO or Veritas VxVM/DMP multipathing software on each host to achieve high-availability, multiple-path capability. Sun Solaris MPxIO and Veritas VxVM/DMP multipathing software require two Fibre Channel Adapters (FCAs) connected to both controllers. At this time, single-path mode is supported only when Veritas Volume Manager is used. Operating constraints You can find information about operating constraints specific to the EVA and HP StorageWorks Command View EVA in their respective release notes. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

Table 2
lists the supported Sun Solaris platforms.
Table 2 Supported platforms
Platform
Model number
Sun Fire
V120 V210 V240 V440
V490 V890 280R V480
V880 V1280 4800 4810
6800 12K 15K E2900 E4900
E6900 V20z (Solaris 10
x64/x86 only) V40z (Solaris
10 x64/x86 only)
Enterprise
E220R E420R E250 E450
E3000 E3500 E4000 E4500
E5000 E5500 E6000 E6500
E10000
HP x86 Proliant
(Solaris 10 only)
DL145 DL145 G2 DL385
DL585
Required patches
This release was tested with the current Sun Solaris patches installed. For the latest patch information,
see the Secure Path for Sun Solaris specifications at this web site:
h
t
t
p
:
/
/
h
1
8
0
6
6
.
w
w
w
1
.
h
p
.
c
o
m
/
p
r
o
d
u
c
t
s
/
s
t
o
r
a
g
e
w
o
r
k
s
/
e
n
t
e
r
p
r
i
s
e
/
s
p
e
c
i
f
i
c
a
t
i
o
n
.
h
t
m
l
WARNING!
Do not neglect the required patches. Your system will not function properly without them.
Switch support
This release supports the Fibre Channel switches and firmware versions listed in the
HP StorageWorks
SAN design reference guide
, which can be downloaded from the following web site:
h
t
t
p
:
/
/
h
1
8
0
0
4
.
w
w
w
1
.
h
p
.
c
o
m
/
p
r
o
d
u
c
t
s
/
s
t
o
r
a
g
e
w
o
r
k
s
/
s
a
n
/
d
o
c
u
m
e
n
t
a
t
i
o
n
.
h
t
m
l
NOTE:
HP recommends that you do not mix switch firmware versions in your SAN. It is considered a best
practice to uniformly upgrade all switches in the SAN.
Multiple-path support
Sun Solaris with EVA storage requires either Sun Solaris MPxIO or Veritas VxVM/DMP multipathing
software on each host to achieve high-availability, multiple-path capability. Sun Solaris MPxIO and
Veritas VxVM/DMP multipathing software require two Fibre Channel Adapters (FCAs) connected to both
controllers. At this time, single-path mode is supported only when Veritas Volume Manager is used.
Operating constraints
You can find information about operating constraints specific to the EVA and HP StorageWorks
Command View EVA in their respective release notes.
6