HP 4000/6000/8000 HP StorageWorks 4000/6000/8000 Enterprise Virtual Array Conn - Page 9

Codeload usage, Changing the ProLiant BIOS

Get HP 4000/6000/8000 PDF manuals and user guides View all HP 4000/6000/8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Codeload usage When a system with a maximum configuration is running at full capacity, it may experience a time-out condition before codeload is complete. HP recommends that you always upgrade the multipathing software at an off-peak time. Changing the ProLiant BIOS If you have a ProLiant server with four or more HBAs, you must change the MPS Table Mode setting in the BIOS; otherwise, your system may not detect all attached devices. To change the setting: 1. Press F1 to access the ROM-Based Setup Utility (RBSU) during power-on self-test (POST). This typically occurs after 5i Disk Array initialization. 2. Select System Options > OS Selection > Linux. 3. Select Advanced Options > MPS Table Mode. 4. Select Auto Set Table. 5. Press Esc twice, and then press F10 to save the configuration. 4000/6000/8000 Enterprise Virtual Array connectivity 5.1A for Linux release notes 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
Codeload usage
When a system with a maximum configuration is running at full capacity, it may experience a time-out
condition before codeload is complete. HP recommends that you always upgrade the multipathing
software at an off-peak time.
Changing the ProLiant BIOS
If you have a ProLiant server with four or more HBAs, you must change the MPS Table Mode setting in
the BIOS; otherwise, your system may not detect all attached devices. To change the setting:
1.
Press
F1
to access the ROM-Based Setup Utility (RBSU) during power-on self-test (POST).
This typically occurs after 5i Disk Array initialization.
2.
Select
System Options > OS Selection > Linux
.
3.
Select
Advanced Options > MPS Table Mode
.
4.
Select
Auto Set Table
.
5.
Press
Esc
twice, and then press
F10
to save the configuration.
4000/6000/8000 Enterprise Virtual Array connectivity 5.1A for Linux release notes
9