HP 4400 HP Disk Drive Replacement Instructions (652989-001, June 2011) - Page 1

HP 4400 Manual

Get HP 4400 PDF manuals and user guides View all HP 4400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

HP Disk Drive Replacement Instructions These instructions apply to Fibre Channel and SAS disk drives. © Copyright 2011 Hewlett-Packard Development Company, L.P. First edition: May 2011 The information in this document is subject to change without notice. Printed in Puerto Rico www.hp.com About this document For the latest documentation, go to http://www.hp.com/support/ manuals, and select your product. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. WARRANTY STATEMENT: To obtain a copy of the warranty for this product, see the warranty information website: http://www.hp.com/go/storagewarranty Before you begin Observe the following precautions when replacing the disk: • Ensure you have a replacement part available before removing the failed component. Removing a component impacts cooling within the enclosure. Use a drive blank if a new drive is not available. • HP recommends that the replacement drive matches the capacity and speed of the original drive. For example, if the original drive was a 300 GB, 15K RPM drive, the replacement would be a 300 GB, 15K RPM drive. • Do not remove more than one disk at a time from the enclosure. Doing so would impact cooling of the enclosure and may cause data loss. • Parts can be damaged by electrostatic discharge. Use proper antistatic protection. • Have a copy of the product user guide available for reference. You can download a copy of the user guide from the product support page on the HP website. Figure 1 shows the numbering of Fibre Channel disk drives in the disk enclosure used with the EVA. Figure 1 FC disk drive numbering . Figure 2 shows the numbering of SAS small form factor (SFF) disk drives and Figure 3 shows the numbering of large form factor (LFF) disk drives in the disk enclosure used with the P6300/P6500 EVA. *652989-001* Figure 2 SAS SFF disk drive numbering . Page 1

  • 1
  • 2
  • 3
  • 4
  • 5
HP Disk Drive Replacement
Instructions
These instructions apply to Fibre Channel and SAS
disk drives.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
First edition: May 2011
The information in this document is subject to change without notice.
Printed in Puerto Rico
www.hp.com
*652989-001*
About this document
For the latest documentation, go to
h
t
tp://w
w
w
.hp
.co
m/su
ppo
r
t/
man
uals
, and select your product.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
WARRANTY STATEMENT: To obtain a copy of the warranty for this
product, see the warranty information website:
h
t
tp://w
w
w
.hp
.co
m/go/s
t
o
r
age
w
ar
r
an
t
y
Before you begin
Observe the following precautions when replacing the disk:
•
Ensure you have a replacement part available before removing the
failed component. Removing a component impacts cooling within
the enclosure. Use a drive blank if a new drive is not available.
•
HP recommends that the replacement drive matches the capacity and
speed of the original drive. For example, if the original drive was a
300 GB, 15K RPM drive, the replacement would be a 300 GB, 15K
RPM drive.
•
Do not remove more than one disk at a time from the enclosure.
Doing so would impact cooling of the enclosure and may cause data
loss.
•
Parts can be damaged by electrostatic discharge. Use proper anti-
static protection.
•
Have a copy of the product user guide available for reference. You
can download a copy of the user guide from the product support
page on the HP website.
Figure 1
shows the numbering of Fibre Channel disk drives in the disk
enclosure used with the EVA.
Figure 1 FC disk drive numbering
.
Figure 2
shows the numbering of SAS small form factor (SFF) disk drives
and
Figure 3
shows the numbering of large form factor (LFF) disk drives
in the disk enclosure used with the P6300/P6500 EVA.
Figure 2 SAS SFF disk drive numbering
.
Page 1