HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 116
HP JetDirect Configuration Messages, Table 7.1, Novell NetWare Configuration Messages 1 of 2 - jetdirect software download
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Table 7.1 Novell NetWare Configuration Messages (1 of 2) Message IPX/SPX STATUS: Description Indicates the current IPX/SPX protocol status. DISABLED indicates that IPX/SPX was manually disabled. READY indicates the HP JetDirect print server is awaiting data. INITIALIZING indicates that the print server is registering the node address or name. MODE: Code is in the middle of a download. The mode used by the print server. SOURCE ROUTING: QUEUE SERVER indicates that the print server receives data directly from the queue; REMOTE PRINTER, with the printer number following it, indicates that the print server emulates a Novell remote printer. If the printer is not configured, this field displays QUEUE SERVER. Indicates the current status of source routing. UNKNOWN is displayed when NetWare source routing is configured to AUTO, but the source routing method has not been detected. NO is displayed when source routing is configured to AUTO, and the automatic algorithm has determined that source routing should not be used. YES is displayed when source routing is configured to AUTO, and the automatic algorithm has determined that source routing should be used. NODE NAME: DISABLED, SINGLE R, or ALL RT is displayed when the user has manually configured source routing through the printer's control panel or through software. Queue Server Mode: The print server name. This name must match a valid print server on the appropriate NetWare file server. The default name is NPIXXXXXX. Remote Printer Mode: The name you gave the network printer when you configured the network printer. The default name is NPIXXXXXX. 110 HP JetDirect Configuration Page Messages EN