HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 132
Table 7.5, General HP JetDirect Messages 12 of 15, TFTP IN PROGRESS
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Table 7.5 General HP JetDirect Messages (12 of 15) Message SIGNAL LOSS SINGLE STATION SQE ERROR TFTP IN PROGRESS TFTP LOCAL ERROR TFTP REMOTE ERROR TFTP RETRIES EXCEEDED TIMEOUT TOKEN ERRORS: TOTAL PACKETS RECEIVED: TOTAL PACKETS RCVD: TRANSMIT BEACON TRANSMIT ERROR Description The HP JetDirect print server has detected a loss of signal on the ring. Check the cable from the HP JetDirect print server to the network and check the wiring concentrator. or A signal loss condition has been detected at the HP JetDirect print server receiver input during the open process (either when wrapped or inserted onto the ring). The HP JetDirect print server has sensed that it is the only station on the ring. Run the power-on self-test: turn the printer off, then on again. If the error persists, replace the HP JetDirect print server. The HP JetDirect print server is currently in the process of obtaining its basic IP configuration information through TFTP and has not detected any errors. The TFTP transfer of the configuration file from the host to the HP JetDirect print server failed with the local print server encountering some form of inactivity timeout, or excessive retransmissions situation. The TFTP transfer of the configuration file from the host to the HP JetDirect print server failed with the remote host sending a TFTP ERROR packet to the print server. The overall retrying of the TFTP transfer of the configuration file from the host to the HP JetDirect print server has exceeded a retry limit. The HP JetDirect print server fails to logically insert onto the ring before the insertion timer expires. Each phase of the insertion process must complete before expiration of the 18-second insertion timer. Total number of times a violation of the token-passing protocol has been detected. Total number of frames (packets) received by the HP JetDirect print server without error. This includes broadcast, multicast packets, and packets specifically addressed to the print server. This number does not include packets specifically addressed to other nodes. The HP JetDirect print server is transmitting beacon frames to the ring. Check the network topology and verify all cable segments. 126 HP JetDirect Configuration Page Messages EN