HP 600N HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 51
Using Telnet - jetdirect network card
UPC - 088698541357
View all HP 600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Using Telnet This subsection describes how to configure the print server using Telnet. Note To use Telnet commands with the HP JetDirect print server, a route must be available from your workstation to the print server. Simplistically, this means that there must be a match between the network identification of your system to that of the HP JetDirect print server. On Windows 95/98 and NT/2000 systems, you can use the following route command at a DOS prompt to add a route to the print server: route add where is the IP address configured on the HP JetDirect print server, and is the IP address of the workstation's network card that is attached to the same physical LAN as the print server. CAUTION Using Telnet to change dynamically-configured JetDirect print servers (for example, using BOOTP, RARP, DHCP), may result in a static configuration depending on the parameter being changed. EN TCP/IP Configuration 45