HP 625 Compaq 325 and 326 Notebook PCs HP 425 and 625 Notebook PCs - Maintenan - Page 61
Hard drive, Remove the two Phillips PM2.5×6.0 screws
View all HP 625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Hard drive NOTE: The hard drive spare part kit includes a hard drive bracket. Description 500-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 500-GB, 5400-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 320-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 320-GB, 5400-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 250-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 250-GB, 5400-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 160-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 160-GB, 5400-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 500-GB, 7200-rpm hard drive 500-GB, 5400-rpm hard drive 320-GB, 7200-rpm hard drive 320-GB, 5400-rpm hard drive 250-GB, 7200-rpm hard drive 250-GB, 5400-rpm hard drive 160-GB, 7200-rpm hard drive 160-GB, 5400-rpm hard drive Spare part number 611029-001 614956-001 611028-001 614955-001 611027-001 614523-001 614522-001 615844-001 608139-001 614958-001 608138-001 614957-001 608137-001 493994-001 455954-001 615040-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the service door (see Service door on page 49). Remove the hard drive from a 39.6-cm (15.6-in) computer: 1. Position the computer right-side up with the front toward you. 2. Remove the two Phillips PM2.5×6.0 screws (1) and loosen the Phillips PM2.5×11.0 captive screw (2) that secure the hard drive to the computer. 3. Grasp the mylar tab on the hard drive and slide the hard drive (3) to the left to disconnect it from the system board. Component replacement procedures 51