HP 625 Compaq 325 and 326 Notebook PCs HP 425 and 625 Notebook PCs - Maintenan - Page 74
Palm rest, Remove the battery see
View all HP 625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Palm rest Description Spare part number Palm rest for Compaq brand units with 33.8-cm (13.3-in) displays (includes TouchPad, TouckPad 605779-001 board, and 2 cables) Palm rest for Compaq brand units with 33.8-cm (13.3-in) displays (includes TouchPad, TouchPad 616602-001 board, and 2 cables), Red Palm rest for HP brand units with 39.6-cm (15.6-in) displays (includes TouchPad, TouchPad board, and 2 cables) 605782-001 Palm rest for HP brand units with 35.6-cm (14-in) displays (includes TouchPad, TouchPad board, 605780-001 and 2 cables) Before removing the palm rest, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the service door (see Service door on page 49). Remove the palm rest on 39.6-cm (15.6-in) computers: 1. Position the computer right side up with the display open. 2. Pull up (1) on the top edge of the palm rest nearest the keyboard. With the palm rest at an angle, slide the unit (2) to release the latches at its base. 64 Chapter 4 Removal and replacement procedures