HP 6400/8400 HP StorageWorks disk enclosure front UID replacement instructions - Page 1
HP 6400/8400 Manual
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP StorageWorks disk enclosure front UID replacement instructions About this document For the latest documentation, go to http://www.hp.com/support/manuals and select your product. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. WARRANTY STATEMENT: To obtain a copy of the warranty for this product, see the warranty information website: http://www.hp.com/ go/storagewarranty These instructions apply to the MSA6X/7X, Proliant DL320S, EVA4400, EVA6400, and EVA8400 product families. Before you begin CAUTION: Parts can be damaged by electrostatic discharge. Use proper anti-static protection. Refer to the documentation that shipped with your system for additional information. See Figure 1 for the location of the front UID board on the front of the disk enclosure. © Copyright 2009 Hewlett-Packard Development Company, L.P. Second edition: February 2009 The information in this document is subject to change without notice. Printed in Puerto Rico www.hp.com *533477-001* 1. Front UID under plastic bezel Figure 1 Location of the front UID board 1 gl0109 Verifying component failure Improper or failed operation of the LEDs on the front UID may indicate a replacement is necessary. Proper LED operation for the MSA6X/7X is displayed as: • Blue = Identified • Blue flashing = Active remote management • Off = No active remote management Proper LED operation for the EVA is displayed as: • = Enclosure external health. Solid green indicates the enclosure is operating normally. Blinking green indicates power up. • = Enclosure fault warning. Flashing amber indicates a fault of lesser importance, while solid amber indicates a fault of greater importance. Page 1