HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch manageme - Page 71
SNMP v3 User Editor dialog box, Table 14 SNMP v3 User Editor dialog box fields
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Figure 32 SNMP v3 User Editor dialog box Table 14 describes the SNMP v3 User Editor dialog box parameters. After configuring the user, click OK to save the settings and close the dialog box. Table 14 SNMP v3 User Editor dialog box fields Field User Name Group Authentication Type Authentication Phrase Confirm Authentication Phrase Privacy Type Privacy Phrase Confirm Privacy Phrase Description Name assigned to this SNMP v3 user. Sets user's Read privileges: Read Only permits user to view only SNMP v3 user settings, Read Write permits user to view and change SNMP v3 user settings. None, MD5, SHA. If None, no authentication phrase is required. MD5 and SHA require an authentication phrase. A unique string or phrase that functions as a password that verifies the authenticity of the user. Re-enter the Authentication Phrase to confirm it. DES or None. If None, no privacy phrase is required. A unique string or phrase that functions as a password that verifies the privacy of the user. Re-enter the Privacy Phrase to confirm it. Testing a switch The Switch Diagnostics dialog box (Figure 33) allows you to test and verify the operational status of switches (online and offline). To open the Switch Diagnostic dialog box, open the Switch menu, select Switch Diagnostics, and then select Online Switch Diagnostics or Offline Switch Diagnostics. For each type of test, only one switch at a time can be tested. Offline Diagnostics can only be selected for the entry switch. The diagnostic tests are: • Online-A non-disruptive test that exercises port-to-device connections for all ports on a switch that are currently online except for TR ports, which are not included in Online Switch Diagnostics. 8/20q Fibre Channel Switch QuickTools switch management user guide 71