HP 8/24 Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008 - Page 249
FW-1048, FW-1049, FW-1050
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
30 FW-1048 Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high boundary. The supplied current of the SFP transceiver is outside of the normal range, indicating possible hardware failure. Recommended If the current rises above the high boundary, you must replace the SFP. Action Severity WARNING FW-1048 Message , [FW-1048], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed. Frequent voltage fluctuations are an indication that the SFP is deteriorating. Recommended Replace the SFP if you see frequent voltage fluctuations. Action Severity INFO FW-1050 Message , [FW-1050], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has fallen below the low boundary. Recommended Configure the low threshold to 1 so that the threshold triggers an alarm when the value falls to 0 Action (Out_of_Range). If continuous or repeated alarms occur, replace the SFP before it deteriorates. Severity WARNING Fabric OS Message Reference 197 53-1000600-02