HP 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008 - Page 468
SEC-1320, Message, Probable Cause, Recommended, Action, Severity, fddcfg, fabwideset, clear
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 468 highlights
66 SEC-1320 SEC-1320 Message , [SEC-1320], ,, WARNING, , Non-acl domain tries to join a fabric with strict fabric wide policy Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with a strict fabric-wide policy. Recommended No action is required. The domain is denied by disallowing all its E-ports from connecting to the Action fabric. Severity WARNING SEC-1321 Message , [SEC-1321], ,, ERROR, , Failed secure mode enable command. Reason: . Probable Cause Indicates that the security enable failed on the fabric because switch has conflicting configuration such as fabric wide consistency configuration or AD configuration. Recommended Action Verify that the security event was planned. If the security event was planned, run the fddcfg --fabwideset "" command or ad --clear command to clear the fabric wide consistency configuration or AD configuration and retry the secModeEnable command. Severity ERROR SEC-1322 Message , [SEC-1322], ,, WARNING, , Some DCC policy is too large, distribution cancelled Probable Cause Indicates that this fabric is not able to support a device connection control (DCC) policy with more than 256 ports. Recommended Reconfigure any policy that includes more than 256 ports in its member list, then save the policy Action configuration changes. Severity WARNING SEC-1323 Message Probable Cause , [SEC-1323], ,, INFO, , Key(s) \"\" ignored during configdownload. Indicates that the specified key is ignored during configDownload. 416 Fabric OS Message Reference 53-1000600-02