HP 8/40 Converged Enhanced Ethernet Administrator's Guide v6.4.0 (53-1001761-0 - Page 116
Configuring user-priority mappings, Exit the configuration mode and return to EXEC mode.
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
9 Queueing DRAFT: BROCADE CONFIDENTIAL Perform the following steps from Privileged EXEC mode to configure the QoS trust mode. 1. Enter global configuration mode. switch#configure terminal 2. Specify the 10-gigabit Ethernet interface. Example of selecting the 10-Gigabit Ethernet interface port 0/2. switch(config)#interface tengigabitethernet 0/2 3. Set the interface mode to 'trust'. switch(conf-if-te-0/2)#qos trust cos 4. Exit the configuration mode and return to EXEC mode. switch(conf-if-te-0/2)#exit switch(config)#end 5. Enter the copy command to save the running-config file to the startup-config file. switch#copy running-config startup-config Configuring user-priority mappings Perform the following steps from Privileged EXEC mode to configure user-priority mappings. 1. Enter global configuration mode. switch#configure terminal 2. Specify the 10-gigabit Ethernet interface. Example of selecting the 10-Gigabit Ethernet interface port 0/2. switch(config)#interface tengigabitethernet 0/2 3. Set the interface mode to '3'. switch(conf-if-te-0/2)#qos cos 3 4. Exit the configuration mode and return to EXEC mode. switch(conf-if-te-0/2)#exit switch(config)#end 5. Enter the copy command to save the running-config file to the startup-config file. switch#copy running-config startup-config 94 Converged Enhanced Ethernet Administrator's Guide 53-1001761-01