HP 8/40 Converged Enhanced Ethernet Administrator's Guide v6.4.0 (53-1001761-0 - Page 130
Defining a priority-table map, Define the map.
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
DRAFT: BROCADE CONFIDENTIAL 9 Converged Enhanced Ethernet map configuration Example of defining a CEE map with a Priority Group Table. PGID PG% PFC 15.0 - N 0 50 Y 1 50 N Description IPC SAN LAN switch:admin>cmsh switch>enable switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#cee-map test switch(config-ceemap)#priority-group-table 0 weight 50 pfc switch(config-ceemap)#priority-group-table 1 weight 50 switch(config-ceemap)#exit switch(config)#end 5. Enter the copy command to save the running-config file to the startup-config file. switch#copy running-config startup-config Defining a priority-table map Perform the following steps from Privileged EXEC mode define a priority-table map. 1. Enter global configuration mode. switch#configure terminal 2. Specify the name of the CEE map to define. In this example 'test' is used. switch(config)#cee-map test 3. Define the map. switch(config-ceemap)#priority-table 1 1 1 0 1 1 1 15.0 Example of defining a CEE map with a Priority-to-Priority Group Table Priority PGID 0 1 1 1 2 1 3 0 4 1 5 1 6 1 7 15 switch:admin>cmsh switch>enable switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#cee-map test switch(config-ceemap)#priority-table 1 1 1 0 1 1 1 1 108 Converged Enhanced Ethernet Administrator's Guide 53-1001761-01