HP 8/40 Fabric OS Encryption Administrator's Guide v6.4.0 (53-1001864-01, June - Page 99

Viewing and editing group properties 2 FIGURE 47 Encryption Group Properties dialog box General tab The properties displayed in the General tab are described below. • Encryption group name - the name of the encryption group. • Group status - the status of the encryption group, which can be OK-Converged or Degraded. Degraded means the group leader cannot contact all of the configured group members. • Deployment mode - the group's deployment mode, which is transparent. • Failback mode - The group's failback mode, which can be automatic or manual. The failback mode can be changed by clicking on the field and selecting the desired mode. • Key vault - the vault type, either RSA Key Manager (RKM) NetApp Lifetime Key Manager (LKM), HP Secure Key Manager (SKM), Thales Encryption Manager for Storage (TEMS), or Tivoli Key Lifetime Manager (TKLM. • REPL Support - whether or not remote replication LUNs support is enabled or disabled. You can change the current setting by clicking on the field and selecting the desired state. • Primary Key Vault IP address - The IP address of the primary key vault, either IPv4 or host name. • Primary Key Vault Connection Status - the status of the connection to the primary key vault. In an operating environment, the status should be Connected. • Backup key vault IP address - the IP address of the backup key vault. • Backup Key Vault Connection Status - the status of the connection to the backup key vault, if a backup is configured. • Primary key vault certificate - the details of the primary vault certificate; for example, version and signature information. • Backup key vault certificate - the details of the backup vault certificate; for example, version and signature information. Fabric OS Encryption Administrator's Guide 81 53-1001864-01