HP 8/8 Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010) - Page 192

Fibre Channel Port group, swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1

Page 192 highlights

5 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated community string. Any or all of the trap recipients can be configured to send a trap for the associated community string. The maximum number of trap recipients that can be configured is six. If no trap recipient is configured, no traps are sent. The trap recipient IP address should be part of the Access Control List for Fabric OS v2.6.1, v3.1, and v4.x (refer to the Fabric OS Command Reference and the snmpConfig command for more information). swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 This is the trap severity level associated with swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3. The trap severity level, is in conjunction with the event's severity level. When an event occurs, and if its severity level is at or below the set value, the SNMP trap is sent to configure trap recipients. The severity level is limited to particular events. If a new value is set successfully, it takes effect immediately. This object obsoletes swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1. Fibre Channel Port group This group contains information about the physical state, operational status, performance, and error statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which supports the Fibre Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port. swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 Values The maximum number of Fibre Channel ports on this switch. It includes U_Port, F_Port, FL_Port, and any other types of Fibre Channel port. The valid values are as follows: Brocade 300 Brocade 4100 Brocade 4900 Brocade 5000 Brocade 5100 Brocade 5300 Brocade 7500 or 7500E Brocade 7600 Brocade 7800 Extension Switch Brocade 8000 24 ports 32 ports 64 ports 32 ports 40 ports 80 ports 32 ports 16 ports 24 ports 32 ports 174 Fabric OS MIB Reference 53-1001768-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372
  • 373
  • 374
  • 375
  • 376
  • 377
  • 378
  • 379
  • 380
  • 381
  • 382

174
Fabric OS MIB Reference
53-1001768-01
swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4
5
If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is
not sent for the associated community string.
With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated
community string.
Any or all of the trap recipients can be configured to send a trap for the associated community
string. The maximum number of trap recipients that can be configured is six. If no trap recipient is
configured, no traps are sent.
The trap recipient IP address should be part of the Access Control List for Fabric OS v2.6.1, v3.1,
and v4.x (refer to the
Fabric OS Command Reference
and the
snmpConfig
command for more
information).
swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4
This is the trap severity level associated with
swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3
. The
trap severity level, is in conjunction with the event’s severity level. When an event occurs, and if its
severity level is at or below the set value, the SNMP trap is sent to configure trap recipients. The
severity level is limited to particular events. If a new value is set successfully, it takes effect
immediately.
This object obsoletes
swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1
.
Fibre Channel Port group
This group contains information about the physical state, operational status, performance, and
error statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which
supports the Fibre Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port.
swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1
The maximum number of Fibre Channel ports on this switch. It includes U_Port, F_Port, FL_Port,
and any other types of Fibre Channel port.
Values
The valid values are as follows:
Brocade 300
24 ports
Brocade 4100
32 ports
Brocade 4900
64 ports
Brocade 5000
32 ports
Brocade 5100
40 ports
Brocade 5300
80 ports
Brocade 7500 or 7500E
32 ports
Brocade 7600
16 ports
Brocade 7800 Extension Switch
24 ports
Brocade 8000
32 ports