HP 8/8 Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010) - Page 261

connUnitContact 1.3.6.1.3.94.1.6.1.23 8 Values onlineConnUnit = enable switch default after reboot = unknown The declaration 1 (unknown) maps to the default value upon rebooting, and 2 (invalid) is not applicable. Declarations 3 and 4 perform the same operation-a cold boot of the switch. Possible values are: • unknown (1) • invalid (2) • resetConnUnitColdStart (3): Reboot. Performs a switch reboot. • resetConnUnitWarmStart (4): Fastboot. The addressed unit performs a Warm Start reset. • offlineConnUnit (5): Disable switch. The addressed unit puts itself into an implementation-dependant offline state. In general, if a unit is in an offline state, it cannot be used to perform meaningful Fibre Channel work. • onlineConnUnit (6): Enable switch. The addressed unit puts itself into an implementation-dependant online state. In general, if a unit is in an online state, it is capable of performing meaningful Fibre Channel work. connUnitContact 1.3.6.1.3.94.1.6.1.23 Contact information for this connectivity unit. Displays the same value as sysContact. Changing the value in this variable causes the value in sysContact to also be changed. connUnitLocation 1.3.6.1.3.94.1.6.1.24 Location information for this connectivity unit. Displays the same value as sysLocation. connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 Defines the event severity logged by this connectivity unit. All events of severity less than or equal to connUnitEventFilter are logged in connUnitEventTable. Return Always returns value 9 (debug). connUnitNumEvents 1.3.6.1.3.94.1.6.1.26 Values Number of events currently in connUnitEventTable. For Fabric OS v3.0 this value ranges from 0 to 64. For Fabric OS v4.0 this value ranges from 0 to 255. For Fabric OS v4.2 this value ranges from 0 to 2048. Fabric OS MIB Reference 243 53-1001768-01