HP 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008 - Page 465
SEC-1309, Severity, Message, Probable Cause, Recommended, Action, passwdCfg, setDefault, secModeEnable
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 465 highlights
66 SEC-1309 Severity INFO SEC-1309 Message , [SEC-1309], ,, INFO, , Waiting for RCS transaction to complete: secs Probable Cause Indicates that Secure Fabric OS is still waiting for the reliable commit service (RCS) transaction to complete. Recommended Verify if there are any RCS or RTWR errors. If not, the transaction is still in progress. Action Severity INFO SEC-1310 Message , [SEC-1310], ,, INFO, , Unable to determine data distribution limit of fabric. Please retry later. Probable Cause Unable to obtain the data distribution limit from all switches in the fabric. This may happen if the fabric is reconfiguring or a new domain joined the fabric. Recommended Retry the command when the fabric is stable. Action Severity INFO SEC-1311 Message , [SEC-1311], ,, ERROR, , Security mode cannot be enabled because one or more of the password policies is not set to default value. Probable Cause Indicates that the security enable failed on the fabric because one or more switches in the fabric have password policies that are not set to the default value. Recommended Action Verify that the security event was planned. If the security event was planned, run the passwdCfg --setDefault command on each switch in the fabric to set the password policies to the default value. Then verify with passwdCfg --show that password policies are set to the default values on all switches and retry the secModeEnable command. Severity ERROR SEC-1312 Message , [SEC-1312], ,, INFO, , . Fabric OS Message Reference 413 53-1000600-02