HP 8/80 Brocade EZSwitchSetup Administrator's Guide v6.2.0 (53-1001193-02, Apr - Page 15
Supported switches
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Supported switches 1 Configure your browser to check for newer versions of stored pages on every visit to the page. FIGURE 2 Configuring Internet Explorer 5. Click OK to save the changes. Supported switches You can use EZSwitchSetup with the following switches: • Brocade 200E switch • Brocade 300 switch • Brocade 4100 switch • Brocade 4900 switch • Brocade 5000 switch • Brocade 5100 switch • Brocade 5300 switch Your switch must meet the following requirements: • It must be connected to an Ethernet LAN that is accessible by the host. If it is not, the system issues the message "Page not Found." • It must be in a single-switch fabric. If your switch connects to another switch (if there is an E_Port on the switch), you cannot manage the switch using EZSwitchSetup until you disconnect the switch connection. • It must be running Fabric OS v6.2.0. NOTE If there is an E_Port on the switch and if there is a zone conflict, then the fabric is segmented; in this case, the switch is in a fabric by itself and EZSwitchSetup treats it as a single-switch fabric. EZSwitchSetup Administrator's Guide 3 53-1001193-02