HP 8/80 Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010) - Page 103

fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 3 fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 The desired operational mode of the Fx_Port. NOTE This object is read-only. It is listed incorrectly in the MIB definition as read-write. Fx_Port Physical Level Table This table contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 A table that contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 An entry containing physical level status and parameters of an Fx_Port. fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 Values The desired state of the Fx_Port. A management station might place the Fx_Port in a desired state by setting this object accordingly. Possible values are: 1: online (1) 2: offline (2) 3: testing (3) The testing state (3) indicates that no operational frames can be passed. When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2). As the result of either explicit management action or per configuration information accessible by the fabric element, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or remains in the offline state (2). NOTE This object is read-only. It is listed incorrectly in the MIB definition as read-write. fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2 The current operational status of the Fx_Port. Values Possible values are: Fabric OS MIB Reference 85 53-1001768-01