HP 8/80 Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010) - Page 194
swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
5 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 Values Possible values are: • noCard (1) No card is present in this switch slot. • noTransceiver (2) No Transceiver module in this port (Transceiver is the generic name for GBIC, SFP, and so on). • laserFault (3) The module is signaling a laser fault (defective GBIC). • noLight (4) The module is not receiving light. • noSync (5) The module is receiving light but is out of sync. • inSync (6) The module is receiving light and is in sync. • portFault (7) The port is marked faulty (defective GBIC, cable, or device). • diagFault (8) The port failed diagnostics (defective G_Port or FL_Port card or motherboard). • lockRef (9) Port is locking to the reference signal. • validating (10) The module is being validated. • invalidModule (11) The module is invalid. • unknown(255) The module is unknown. swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 The operational status of the port. Values Possible values are: • unknown (0) The port module is physically absent. • online (1) User frames can be passed. • offline (2) No user frames can be passed. • testing (3) No user frames can be passed. • faulty (4) The port module is physically faulty. swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 The desired state of the port. A management station might place the port in a desired state by setting this object accordingly. Based on the port status, this OID returns one of the following: • Online -- When queried port is online. • Offline -- When queried port is offline. • Faulty -- When port is in faulty state. This OID is settable, the following values can be used to set: • Online -- To change port's state to Online. • Offline -- To change port's state to Offline. 176 Fabric OS MIB Reference 53-1001768-01