HP 9040n HP LaserJet 9040/9050 - User Guide - Page 60
To change the fuser levers, If an optional output device is installed
UPC - 829160954967
View all HP 9040n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
3 Adjust the guides to touch the envelope stack without bending the envelopes. Make sure the envelopes fit under the tabs on the guides. 4 Change the fuser levers (see To change the fuser levers). To change the fuser levers 1 If an optional output device is installed, slide it away from the printer to access the left door. 2 Open the left door. WARNING! Avoid touching the adjacent fusing area. It can be hot. 58 Chapter 2 Printing tasks ENWW
58
Chapter 2 Printing tasks
ENWW
3
Adjust the guides to touch the envelope stack without bending the envelopes. Make sure the
envelopes fit under the tabs on the guides.
4
Change the fuser levers (see
To change the fuser levers
).
To change the fuser levers
1
If an optional output device is installed, slide it away from the printer to access the left door.
2
Open the left door.
WARNING!
Avoid touching the adjacent fusing area. It can be
hot
.