HP AE326A HP StorageWorks 1500 Modular Smart Array Installation Guide (355901- - Page 38
With the front of the template and the rack facing you, align the lower, for the component
UPC - 882780184954
View all HP AE326A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installation Procedures - All Deployments Caution: To prevent damage and to ease insertion of the device into the rack, support the weight of the device and keep it level when sliding it into the rack. WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: ■ The leveling jacks on the rack are extended to the floor. ■ The full weight of the rack rests on the leveling jacks. ■ The stabilizing feet are attached to the rack if it is a single-rack installation. ■ The racks are coupled together in multiple-rack installations. ■ Only one component in a rack is extended at a time. A rack may become unstable if more than one component is extended. Use the following instructions to install the MSA and its storage enclosures: 1. Use the provided rack template as a guide to indicate where to place the rails for the component: a. With the front of the template and the rack facing you, align the lower edge of the template with the bottom of the rack (or the top of the previous rack component.) b. After verifying that the template is level, push the template tabs into the rack holes to hold the template in place. 38 HP StorageWorks 1500 Modular Smart Array Installation Guide