HP AE326A HP StorageWorks 1500 Modular Smart Array Installation Guide (355901- - Page 74
Installing MSA-specific components on the servers, Array Configuration Utility ACU
UPC - 882780184954
View all HP AE326A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Configuration Procedures - Linux Environments Installing MSA-specific components on the servers Because these installation processes involve updating the server configuration, HP recommends performing these tasks during inactive periods. MSA-specific components include: ■ HBA drivers (and multipathing tool, if needed) ■ HP System Management Homepage ■ Array Configuration Utility (ACU) ■ Array Configuration Utility - Command Line Interface (ACU-CLI) Note: If LUNs on the MSA are already being presented to the server (when performing a server upgrade or move), disconnect the MSA from the SAN. If the MSA is unconfigured, the MSA can be connected to the SAN. To install these components on the server, do the following: 1. With the HBAs installed in the server, power on the server and start up the Linux operating system. 2. From the console, log on as the root user. 3. Insert the Support Software CD in the CD-ROM drive of the server. Note: If you created a new Support Software CD from the Web, insert that CD in the CD-ROM drive of the server and do not use the shipping version of the CD. For more information, see: ■ "Determine which version MSA controller firmware to use" on page 17 ■ "Obtain desired controller firmware and Support Software CD versions" on page 61 4. Mount the CD-ROM drive and view the contents of the CD. 5. Locate and read the readme.txt file to review notes and information that supplement this guide. 74 HP StorageWorks 1500 Modular Smart Array Installation Guide