HP AJ732A Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April
HP AJ732A - Cisco MDS 9134 Fabric Switch Manual
UPC - 883585789481
View all HP AJ732A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP AJ732A manual content summary:
- HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 1
Send documentation comments to [email protected] Cisco MDS 9000 Family System Messages Reference Cisco MDS 9000 SAN-OS Release 3.3(1a) April 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS ( - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 2
DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco StadiumVision, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 3
xvi Release Notes xvii Compatibility Information xvii Hardware Installation xvii Cisco Fabric Manager xvii Command-Line Interface xvii Intelligent Storage Networking Services Configuration Guides xviii Troubleshooting and Reference xviii Installation and Configuration Note xviii Obtaining - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 4
Messages 2-21 CDP-2 2-21 CDP-3 2-21 CDP-6 2-23 CERT ENROLL Messages 2-24 CFS Messages 2-25 CFS-2 2-25 CFS-3 2-27 CFS-4 2-29 CFS-6 2-29 CIMSRVPROV Messages 2-32 CIMSRVPROV-2 2-32 Cisco MDS 9000 Family System Messages Reference ii OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 5
Contents Send documentation comments to [email protected] OL-15956-01 CIMSRVPROV-3 2-32 CIMSRVPROV-6 2-33 CLOUD Messages 2-33 2-62 EXCEPTIONLOG-SLOT#-2 2-62 FC-TUNNEL Messages 2-63 FC-TUNNEL-3 2-63 FC-TUNNEL-5 2-65 FCC Messages 2-65 Cisco MDS 9000 Family System Messages Reference iii - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 6
Contents Send documentation comments to [email protected] FCC-2 2-65 FCC-5 2-66 FCC-6 2-67 FCC_LC Messages 2-67 FCC_LC-2 2-67 FCC_LC-5 2-94 FCMPLS-2 2-94 FCMPLS-3 2-95 FCMPLS-5 2-96 FCMPLS-6 2-96 FCNS Messages 2-97 FCNS-2 2-97 Cisco MDS 9000 Family System Messages Reference iv OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 7
documentation comments to [email protected] OL-15956-01 FCNS-3 2-98 FCNS-6 2-99 FCS Messages 2-100 FCS-2 2-100 FCS-3 2-101 FCS-4 2-103 FCS-5 2-103 FCS-6 2-103 FCSP-MGR 2-124 ILC_HELPER Messages 2-125 ILC_HELPER-2 2-125 ILC_HELPER-3 2-125 Cisco MDS 9000 Family System Messages Reference v - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 8
Contents Send documentation comments to [email protected] ILC_HELPER-6 2-125 ILC-SPAN Messages 2-125 ILC-SPAN-3 2-126 IMAGE_DNLD Messages IPS_SB_MGR-SLOT#-6 2-156 IPsec Messages 2-157 IPsec-2 2-157 IPsec-3 2-158 IPsec-5 2-158 Cisco MDS 9000 Family System Messages Reference vi OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 9
Contents Send documentation comments to [email protected] OL-15956-01 IPsec-6 2-159 IPsec-7 2-160 ISAPI Messages 2-160 ISAPI-SLOT#-0 2-160 Messages 2-191 LICMGR-2 2-191 LICMGR-3 2-192 LICMGR-6 2-194 MAC Messages 2-195 MAC-SLOT#-2 2-195 Cisco MDS 9000 Family System Messages Reference vii - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 10
Contents Send documentation comments to [email protected] MCAST Messages 2-196 MCAST-2 2-196 MCAST-4 2-196 MCAST-5 2-196 MODULE Messages -5 2-229 PLATFORM-7 2-232 PLOG Messages 2-232 PLOG-4 2-232 PLOG_SUP Messages 2-232 Cisco MDS 9000 Family System Messages Reference viii OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 11
cisco.com OL-15956-01 PLOG_SUP-4 2-233 PORT Messages 2-233 PORT-3 2-233 PORT-5 2-233 PORT-Resources Messages 2-252 PORT-SECURITY Messages (Deprecated) 2-253 PORT-SECURITY-2 2-253 PORT-SECURITY-3 2-253 PORT-SECURITY-4 2-256 PORT 2-282 RDL-3 2-282 Cisco MDS 9000 Family System Messages Reference ix - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 12
Contents Send documentation comments to [email protected] RDL-6 2-283 RIB Messages 2-284 RIB-0 2-284 RIB-1 2-284 RIB-2 2-284 RIB-3 2- 2-300 SECURITYD-3 2-301 SECURITYD-6 2-301 SENSOR Messages 2-302 SENSOR-2 2-302 SENSOR-3 2-303 Cisco MDS 9000 Family System Messages Reference x OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 13
Contents Send documentation comments to [email protected] OL-15956-01 SENSOR-5 2-304 SENSOR_USD Messages 2-304 SENSOR_USD-2 2-304 SENSOR_USD-3 2-359 SVC_BATTERY-SLOT#-4 2-361 SVC_BATTERY-SLOT#-6 2-361 SYSMGR Messages 2-362 SYSMGR-2 2-362 Cisco MDS 9000 Family System Messages Reference xi - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 14
Contents Send documentation comments to [email protected] SYSMGR-3 2-379 SYSMGR-4 2-386 SYSMGR-5 2-388 SYSMGR-6 2-394 SYSMGR-7 2-395 SYSTEMHEALTH SLOT#-5 2-428 VFC Messages 2-429 VFC-3 2-429 VHBAD Messages 2-430 VHBAD-2 2-430 Cisco MDS 9000 Family System Messages Reference xii OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 15
Contents Send documentation comments to [email protected] OL-15956-01 VHBAD-3 2-431 VHBAD-7 2-433 VNI Messages 2-434 VNI-2 2-434 VNI-3 2- 2-449 VSHD-4 2-450 VSHD-5 2-451 VSHD-7 2-451 WWN Messages 2-452 WWN-1 2-452 WWN-2 2-452 WWN-3 2-454 Cisco MDS 9000 Family System Messages Reference xiii - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 16
XBAR-5 2-459 XBAR_CLIENT Messages 2-462 XBAR_CLIENT-2 2-462 XBAR_CLIENT-3 2-463 ZONE Messages 2-464 ZONE-2 2-464 ZONE-3 2-473 ZONE-4 2-474 ZONE-5 2-476 ZONE-6 2-477 DISK FAILURE CODES A-1 Cisco MDS 9000 Family System Messages Reference xiv OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 17
changed features supported by messages described in this version of the Cisco MDS 9000 Family System Messages Reference. For more information about a specific feature, refer to the Cisco MDS 9000 Family CLI Configuration Guide and Cisco MDS 9000 Family Fabric Manager Configuration Guide. New and - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 18
for and RSCN IPS,IVR,PORT, and RSCN. ILC_HELPER NASB New messages Supports intelligent linecard helper messages. Supports NASB messages.. Incremental messages added to IPSEC and DPVM. BIOS_DAEMON Supports BIOS_DAEMON messages. Cisco Fabric Services (CFS) Supports CFS messages. Changed in - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 19
-ALIAS messages. Dynamic Port Supports DPVM messages. VSAN Membership (DPVM) DSTATS Supports DSTATS messages. Internet Key Exchange (IKE) Supports IKE messages. IP security (IPSEC) Supports IPSEC messages. Resource Supports RM messages. management (RM) SFC Supports SFC messages. SCSI - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 20
New and Changed Information Send documentation comments to [email protected] xxviii Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 21
the system messages for the Cisco MDS 9000 Family of directors and multilayer fabric switches. The system software sends these messages to the console (and, optionally, to a logging server on another system) during operation. Not all messages indicate a problem with your system. Some messages - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 22
screen font Terminal sessions and information the switch displays are in screen font. boldface manual. Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Related Documentation The documentation set for the Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 23
Guide • Cisco MDS 9020 Fabric Switch Hardware Installation Guide Cisco Fabric Manager • Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide • Cisco MDS 9000 Family Fabric Manager Configuration Guide • Cisco MDS 9000 Fabric Manager Online Help • Cisco MDS 9000 Fabric Manager Web Services - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 24
Reference • Cisco MDS 9020 Fabric Switch Configuration Guide and Command Reference • Cisco MDS 9000 Family SAN Volume Controller Configuration Guide Intelligent Storage Networking Services Configuration Guides • Cisco MDS 9000 Family Data Mobility Manager Configuration Guide • Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 25
and command guides for Cisco hardware and Cisco Systems Attn: Customer Document Ordering 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate your comments. Cisco Product Security Overview Cisco provides a free online Security Vulnerability Policy portal at this URL: OL-15956-01 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 26
is found at this URL: http://www.cisco.com/en/US/products/products_psirt_rss_feed.html Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test to find other means of encrypting the data. Cisco MDS 9000 Family System Messages Reference xx OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 27
you do not have a valid Cisco service contract, contact your reseller. Cisco Technical Support & Documentation Website The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 28
network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL: http://www.cisco.com/packet xxii Cisco MDS 9000 Family System Messages - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 29
You can access the Internet Protocol Journal at this URL: http://www.cisco.com/ipj • Networking products offered by Cisco Systems, as well as customer support services, can be obtained at this URL: http://www.cisco.com/en/US/products/index.html • Networking Professionals Connection is an interactive - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 30
Preface Send documentation comments to [email protected] xxiv Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 31
Nov 1 14:07:58 excal-113 %PORT-3-IF_UNSUPPORTED_TRANSCEIVER: Transceiver for interface fc1/13 is not supported . Warning System Log Message Format Description switch The facility of the error or event (daemon, kernel, VSHD, or other facility) OL-15956-01 Cisco MDS 9000 Family System Messages - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 32
to System Messages for the Cisco MDS 9000 Family Send documentation comments to [email protected] Warning System Log Message the message might contain detailed information about the event, including terminal port numbers, network addresses, or addresses that correspond to locations in the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 33
System Messages for the Cisco MDS 9000 Family System Log Message Format Send documentation comments to [email protected] The following example system message shows how the variable field might be used: %MODULE-5-MOD_MINORSWFAIL: Module [dec] reported a failure in service [chars] In this - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 34
information about the event, including terminal port numbers, network addresses, or addresses that code= SYSTEM_MSG Description of the problem= Authpriv [dec] reported a failure in service [chars] [dec] is the Cisco MDS 9000 Family CLI Configuration Guide and the Cisco MDS 9000 Family Cisco MDS 9000 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 35
Chapter 1 Introduction to System Messages for the Cisco MDS 9000 Family Capturing System Messages and History Send documentation comments to [email protected] Fabric Manager Configuration Guide). Only system messages that correspond to the configured logging level or higher severity - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 36
Capturing System Messages and History Chapter 1 Introduction to System Messages for the Cisco MDS 9000 Family Send documentation comments to [email protected] Cisco MDS 9000 Family System Messages Reference 1-6 OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 37
E R System Messages and Recovery Procedures for the Cisco MDS 9000 Family OL-15956-01 This chapter lists messages • CERT ENROLL Messages, page 2-24 • CFS Messages, page 2-25 • CIMSRVPROV Messages, page 2-32 • CLOUD Messages, page 2-33 • CORE-DMON Messages, page 2-35 • CREDIT MON Messages, page - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 38
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] • EXCEPTIONLOG Messages, page 2-62 • FC-TUNNEL Messages, page 2-63 • FCC Messages, page 2-65 • FCC_LC Messages, page 2-67 • FCD Messages, page 2-69 • FCDD Messages - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 39
System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] • LICMGR Messages, page 2-191 2-232 • PLOG_SUP Messages, page 2-232 • PORT Messages, page 2-233 • PORT-SECURITY Messages (Deprecated), page 2-253 • PORT_CHANNEL Messages - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 40
for concurrent AAA sessions was reached. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Cisco MDS 9000 Family System Messages Reference 2-4 OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 41
of a problem with NVRAM. The problem is described in the error message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 42
Initialization failed for the ACL because of the reason shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ACL-2-ACL_LINECARD_STATUS: Status from linecard: [dec], for module: [chars](ID: [dec]), status : [dec], error_id - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 43
]. Explanation There was a mismatch in the persistent storage service (PSS) version. The persistent storage service (PSS) service has a different version number than the expected version number. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ACL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 44
Message ACL-6-ACL_E_PORT_EVENT_STATUS: [chars] [chars]. Explanation This message reports the access control list E port or TE port event status. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Cisco MDS 9000 Family System Messages Reference 2-8 OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 45
Error Message ACL-6-ACL_NX_PORT_EVENT_STATUS: [chars] [chars]. Explanation This message reports the ACL N port or NL port event status. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ACL-6-ACL_PORT_MODE_EVENT_STATUS: [chars] [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 46
] [chars]. Explanation This message reports the ACL update SSRAM for QoS event status. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). ACLTCAM Messages This section contains the access control list ternary content addressable memory (ACLTCAM) messages. ACLTCAM - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 47
shown in the error message. Recommended Action Restart the process. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message ACLTCAM-2-ACL_TCAM_MTS_FAILURE: MTS operation failed: [chars]. Explanation The messaging and transaction service (MTS) operation failed because of the reason shown in the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 48
failed for opCode: [dec]. Explanation The messaging and transaction service (MTS) registration failed for the reason shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ACLTCAM-2-ACL_TCAM_NO_ROUTE: ACLTCAM failed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 49
storage service (PSS) operation because of the reason shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN- also shows the error code for this problem. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 50
. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-14 Cisco MDS 9000 Family System Messages Reference OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 51
Support. Introduced Cisco MDS SAN-OS Release 3.0(1). BOOTVAR Messages This section contains the boot variable (BOOTVAR) messages. BOOTVAR-2 Error Message BOOTVAR-2-ALLOC_MEMORY: Memory allocation failed. Explanation The service failed to allocate memory. Recommended Action Check to see if the switch - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 52
again. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). Cisco MDS SAN-OS Release 3.0(1). Error Message BOOTVAR-3-INIT_FAILED: Initialization failed: Component [chars]. Explanation The service failed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 53
during auto-sync. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 3.0(1). Error Message BOOTVAR-3-NEIGHBOR_REJECT_AUTOCOPY: auto-copy failed - not supported by neighbor supervisor. Explanation The standby supervisor does not - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 54
have the image on the flash before reboot. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message BOOTVAR-5-NEIGHBOR_UPDATE_AUTOCOPY: auto-copy supported by opposing supervisor, starting... Explanation The standby supervisor supports automatic copy. Automatic copy has started. Recommended Action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 55
. Explanation The service has successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release commands or Cisco Fabric Manager procedures to get more information about the error. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 56
for the failure of the CFS operation and rectify the problem. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message CALLHOME-3-CALLHOME_CFS_OPERATION_FAILED: [chars] : [chars]. Explanation The Call Home operation using Cisco Fabric Services (CFS) failed because of the reason shown in the error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 57
. If Call Home was not enabled, use either CLI commands or Fabric Manager procedures to get more information about the error. Introduced Cisco MDS SAN-OS Release 1.2(2a). CDP Messages This section contains the Cisco Discovery Protocol (CDP) messages. CDP-2 CDP-3 Error Message CDP-2-INITFAIL: CDP - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 58
for the failure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message CDP-3-MTSERROR: [chars]. Explanation The Cisco Discovery Protocol daemon encountered a messaging and transaction service (MTS) error. The error message shows the context where the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 59
down gracefully. Recommended Action This is an informational message. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message CDP-6-PORTDISABLE: CDP disabled on port [chars]. Explanation The Cisco Discovery Protocol was disabled on a port. The error message shows the Interface-ID string that - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 60
certificate enrollment exited. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message CERT_ENROLL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 61
]. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message CFS-2-CFS_REJECT: CFS reject: [chars]: Switch WWN [chars], reason [chars]. Explanation When Cisco Fabric Service (CFS) receives a malformed CFS packet from a switch with WWN and IP address shown in - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 62
. Explanation The Cisco Fabric Services could not allocate memory. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 63
CFS-3-MERGE_FAILED: Merge failed for app [chars], local switch wwn [chars],ip [chars], remote switch wwn [chars], ip [chars]. Explanation The Cisco Fabric Services has detected a merge failure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). OL-15956-01 Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 64
2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-3-GENERROR: [chars]. Explanation The Cisco Fabric Services encountered a general error, one that does not - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 65
been translated to the new format. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-6-BECAME_ACTIVE: Became ACTIVE from standby mode. Explanation The Cisco Fabric Services on the standby supervisor became active and it is ready to serve client - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 66
Message CFS-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system manager: Reason=[chars]. Explanation The Cisco Fabric Services failed to send a heartbeat message to the system manager. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 67
down gracefully. Recommended Action This is an informational message. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-6-SWITCHOVER: Switching Over to other Sup. Explanation The Cisco Fabric Services successfully switched over to the standby supervisor. Recommended Action No action is - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 68
A persistent storage service (PSS) snapshot error occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-32 Cisco MDS 9000 Family System Messages Reference OL-15956- - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 69
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 70
message for the reason for failure of the CFS operation and rectify the problem. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message CLOUD-3-CLOUD_FEATURE_MANAGER_ERROR: [chars] : [chars]. Explanation iSLB manager experienced an error. Recommended Action Check the message for the reason for - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 71
started. Get more information using the cloud-discovery status CLI command. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 3.0(1). CORE-DMON Messages This section contains the core dump daemon (CORE-DMON - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 72
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.0(1). 2-36 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 73
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 74
a remote switch was rejected. The error message indicates the reason for failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 75
-alias database with the other switches in the fabric. Resolve any conflicts and commit the changes. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message DEVICE-ALIAS-3-MTS_OPER_FAILED: [chars]. Explanation An error occurred during a messaging and transaction service (MTS) operation. The error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 76
the persistent storage service (PSS) operation and the reason for failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 77
WWN based members. Recommended Action Make sure that the fcalias has port WWN based members and issue the import command again. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message DEVICE-ALIAS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 78
information regarding failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). DEV_LOG Messages This section - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 79
is zoned in the same zone as the storage. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message DMM-SLOT#-5-LOG_ERR_DMM_SRVR_RSCN: Job Id:%Ld Server N-Port pWWN:0x%Lx [chars]. Explanation An RSCN event was received for the server associated with a job - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 80
the suspension of data migrationjob because of in IP connectivity to the peer SSM. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_START: Job Id:%Ld NumSession:[dec]. Explanation Event indicating the start of a data - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 81
MDS SAN-OS Release 1.2(2a). DPVM Messages This section contains the dynamic port VSAN membership (DPVM) messages. DPVM-2 Error Message DPVM-2-ALLOC_FAILED: Memory allocation failed for size:[dec] for [chars]. Explanation Memory allocation failed. Recommended Action If you purchased Cisco support - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 82
. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message DPVM-3-DDAS_MODE_INVALID: [chars]. Explanation The Distributing Devise Alias Services (DDAS) mode is invalid when you merge two switches that have - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 83
. Enter the dpvm activate CLI command or use a similar procedure with Fabric Manager/Device Manager. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message DPVM-4-FEATURE_DISABLED: [chars]. Explanation Dynamic port VSAN membership (DPVM) is unavailable and disabled. Recommended Action No action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 84
storage service (PSS) because of the reason shown in the error message. Recommended Action Enter the show flash command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes in the output for the cause of the PSS error. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 85
. Recommended Action Enter the show flash command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes in the output for the cause of the PSS error. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message DSTATS-3-PSS_OPEN_FAIL: pss open - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 86
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes in the output for the cause of the PSS error. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message DSTATS-3-PSS_STORE_FAIL: pss store - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 87
Action Enter the show flash command or use a similar Fabric Manager/Device Manager procedure to determine which transceiver is being used. Contact customer support for a list of authorized transceiver vendors. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_ADMIN_DOWN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 88
down. Recommended Action Enter the no shutdown command or use a similar Fabric Manager/Device Manager procedure on the PortChannel that the interface belongs to. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_CHANNEL_MEMBERSHIP_UPDATE_IN_PROGRESS: Interface [chars] is - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 89
manager other side not responding). Explanation Remote end domain manager is not responding. Recommended Action No action is required. Introduced Cisco MDS Recommended Action Enter show port internal info and check the status in the ELP failure reason field. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 90
(Isolation due to ESC failure). Explanation Exchange switch parameters (ESC) failed on the interface. Recommended Action Check the output of show port internal event-history to show the ESC protocol exchanges and determine how it failed. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 91
(Error disabled - Incompatible admin port rxbufsize). Explanation The configured receive buffer size is not supported. Recommended Action Get the allowed receive buffer size from show port internal info. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 92
] is down (Error disabled - Incompatible admin port speed). Explanation The configured speed is not supported on this interface. Recommended Action Enter show port internal info to determine the range of speed supported on this interface. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 93
2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ETHPORT-5-IF_DOWN_LOOPBACK_ISOLATION: Interface [chars] is down (Isolation due to port loopback to same switch). Explanation The interface is looped back to - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 94
ends. Recommended Action Configure the port VSAN of the local and remote interfaces to be the same and enter the shutdown and then no shutdown commands. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 95
If this happens again, enter the show port internal info and show port internal event-history CLI commands on the interface to collect more information. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 96
connected to the same remote switch as all the other interfaces in the PortChannel. Introduced Cisco MDS SAN-OS Release 1.2(2a). can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-60 Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 97
. Enter traceroute [ipaddr] to check the connectivity to the peer. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_TCP_PERSIST_TIMER_EXPIRED: Interface [chars] is down(TCP - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 98
LC_EXP_MSG: Linecard exception: [chars] is the affected Port bit map. [dec] Additional information - [chars]. Explanation Line card exception event. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-62 Cisco MDS 9000 Family System Messages Reference OL-15956 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 99
API and the error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FC-TUNNEL-3-PM_ERROR: Port Manager API, [chars], failed with error [hex]. Explanation FC MPLS tunnel invoked the Port Manager API and received an error. The error message shows the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 100
system error code. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FC-TUNNEL-3-PSS_ERROR: PSS operation [chars] returned error: [hex]. Explanation A persistent storage service operation failed. The error message shows the context where the failure - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 101
(MTS) event. The error message shows the messaging and transaction service (MTS) opcode. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). FC-TUNNEL-5 Error Message FC-TUNNEL-5-MSG_INTERFACE_DOWN: Interface [chars] is down. Explanation The Fibre Channel interface - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 102
: FCC has been disabled. Explanation The Fibre Channel Congestion Control process has been disabled. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCC-5-ENABLE: FCC has been enabled. Explanation The Fibre Channel Congestion Control process has - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 103
with priority greater than or equal to the threshold shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). FCC_LC Messages This section contains the Fibre Channel Congestion Control line card (FCC_LC) messages. FCC_LC-2 Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 104
disabled. Explanation The Fibre Channel Congestion Control line card process has been disabled. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message FCC_LC-5-ENABLE: FCC_LC has been enabled. Explanation The Fibre Channel Congestion Control line card - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 105
packets with priority less than or equal to the threshold shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). FCD Messages This section contains the FICON control device (FCD) messages. FCD-7 Error Message FCD-7-SB3_ABTS_EXCHANGE: sb3 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 106
Explanation Illegal event received in twilight zone remover finite state machine (FSM). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCDD-SLOT#-5-LOG_FCDD_VCONF_FSM: [chars]. Explanation Illegal event received in VSAN configuration finite state - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 107
]. Explanation Illegal event received in VSAN normal operation finite state machine (FSM). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). FCDD-SLOT#-7 Error Message FCDD-SLOT#-7-LOG_FCDD_DEBUG: [chars]. Explanation Unexpected errors that affect some normal - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 108
SLOT#-5-LOG_FCDDH_NOTICE: [chars]. Explanation Major configuration changes occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(1). FCDDH Messages This section contains the Fibre Channel device discovery helper FCDDH - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 109
to a unique WWN. Then change the domain ID for one of the switches. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FCDOMAIN-2-EPORT_ALREADY_ISOLATED: Interface [chars] is down - VSAN [dec]. Explanation The domain manager was going to isolate the interface in the VSAN shown in the error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 110
is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCDOMAIN-2-FC2BIND_FAILED: Bind to FC2 Service failed. Explanation The domain manager has not been able to contact the FC2 module. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 111
the necessary information to the domain manager. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 112
use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCDOMAIN-2-SDWRAPBIND_FAILED: Bind to Debug Server failed. Explanation The domain manager has not been able to contact the history debug service. Any problems - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 113
to the domain manager. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCDOMAIN-2-VSAN_MERGE_DETECTED: Merge detected with VSAN [dec] (Common Fabric Name [chars]). Explanation The local VSAN and remote VSAN have the same principal switch and are - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 114
failure (sending of a message failed). Explanation The domain manager has not been able to send a message to the message transactional service (MTS). Recommended Action Execute a nondisruptive fcdomain restart in the affected VSAN. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCDOMAIN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 115
to debug server failed. Explanation The domain manager feature has not been able to contact the debug service. Any problems occurring in the The domain manager feature will not be logged. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message FCDOMAIN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 116
session on the local switch and start a new one on the principal switch. Introduced Cisco MDS SAN-OS Release Cisco MDS SAN-OS Release 1.2(2a). Error Message FCDOMAIN-4-FCID_PERSISTENT_TBL_ALMOST_FULL: FCID persistent table is almost full. Explanation The domain manager has 80% or more of the FC - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 117
downstream link. Recommended Action Use the CLI or Fabric Manager/Device Manager to configure the domain ID type as static in an existing VSAN. On the CLI, enter the fcdomain domain [static vsan vsan-id] command. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message FCDOMAIN-5-FABRICCONFSTARTBF - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 118
SAN-OS Release 3.0(1). FCDOMAIN-6 Error Message FCDOMAIN-6-BF_STARTED: BF started by [chars]. Explanation A build fabric has started in this VSAN. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(2). 2-82 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 119
FC IDs. Recommended Action No action is required. Introduced Cisco MDS switched from [chars] to [chars]. Explanation The upstream interface has been fast-switched because of a link failure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(2) OL-15956-01 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 120
VSAN has started. This can happen when two or more fabrics merge, or when the user manually triggers a nondisruptive reconfiguration of the VSAN. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). 2-84 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 121
: Assigned FCID(s) [hex]:[hex]:[hex] with mask [dec]. Explanation The domain manager assigned the FC ID(s) with mask shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(2a). Error Message FCDOMAIN-6-FCIDS_FREED: Freed FCID(s) [hex]:[hex - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 122
ID change, all the FC IDs associated with it would be invalidated. Recommended Action Use the CLI or Fabric Manager/Device Manager to configure the domain ID type as static in an existing VSAN. On the CLI, enter the fcdomain domain static vsan [vsan-id] command. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 123
area. Explanation An FC ID was requested with type 00.00.YY, but specified an entire area. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCDOMAIN-6-MY_NON_VIRTUAL_DOM_CONFLICTS: During VSAN merge detected that the local switch has the same - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 124
Selection started. Explanation A principal switch selection (PSwS phase) has started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message FCDOMAIN-6-RCF_STARTED: RCF started by [chars]. Explanation A fabric reconfiguration has started in this VSAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 125
Action Check which switches have the same WWN and change either one. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FCDOMAIN-6-TIMER_UNKNOWN: fcdomain has received a notification for an unknown timer expiration. Explanation A timer unknown to the domain manager has expired. Recommended - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 126
identity of the requestor for the FC IDs. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message Cisco MDS SAN-OS Release 1.2(2a). FCDOMAIN-7 Error Message FCDOMAIN-7-EPORT_ALREADY_ISOLATED: Interface [chars] is down. Explanation The domain manager was - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 127
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-91 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 128
to the VSAN. Explanation There may be a problem in the sequence that shuts down all interfaces before fcdomain receives a request from FICON manager to purge the persistent FC ID table. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message FCDOMAIN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 129
been used. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCDOMAIN-7-PSWSCOMPLETED: Principal Switch Selection completed (Fabric Name [chars]). Explanation The principal switch selection (PSwS phase) has completed. Recommended Action No action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 130
An FCFWD event happened. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). FCMPLS Messages This section contains the FC MPLS messages. FC MPLS messages were deprecated in Cisco MDS SAN-OS Release 1.3(1). FCMPLS-2 Error Message FCMPLS-2-PROC_SHUTDOWN: daemon - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 131
Explanation FC MPLS process received unexpected messaging and transaction service (MTS) event. MTS opcode is specified in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 132
chars] is shutdown. Explanation Existing LDP session has been shut down. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(1). Error Message FCMPLS-6-FT_SEQ_ROLLOVER: Rolling over the local ft ack number. Explanation Fault - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 133
[dec] exceeded. Explanation Name server database is full. The max number of entries of ports is already present in the database. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCNS-2-INIT_FAILURE: : [chars]. Explanation The Fibre Channel name - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 134
FCNS-3 Error Message FCNS-2-RELOAD_FAILURE: : [chars]. Explanation Failed to reload information from persistent storage service( PSS). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCNS-3-BAD_FRAME: : [chars]. Explanation Received a bad frame - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 135
: [chars] [chars]. Explanation Failure occurred trying to do a messaging and transaction service messaging and transaction service (MTS) operation. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). FCNS-6 Error Message FCNS-3-PSS_FAILURE: : [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 136
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FCS Messages This section contains the Fabric Configuration Server (FCS) messages. FCS-2 Error Message FCS-2-ALLOC_FAILED: Memory allocation failed for size:[dec]. - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 137
. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCS-3-BAD_CT_FRAME: Invalid FCS frame: [chars] received from [hex]. Explanation An invalid Fabric Configuration Server (FCS) FC-CT frame received from - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 138
you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCS-3-OTHER_ERR: [chars]. Explanation A Fabric Configuration Server - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 139
]. Explanation An invalid FCS FC-CT frame with [chars] received from FC-ID [hex]. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). FCS-6 Error Message FCS-5-API_FAIL: [chars]: [chars]. Explanation An API called by Fabric Configuration Server (FCS) failed. The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 140
Fibre-Channel Initialization of an F_Port failed ( [chars] ). Explanation FC-SP manager is unable to initialize with the FC-2 F port infrastructure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCSP-MGR-2-FC2_UNKNOWN_FRM_RECD_CRIT: Received an - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 141
] ). Explanation FC-SP manager is unable to initialize with the inter-process communications infrastructure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FCSP-MGR-2-LICENSE_UNAVAILABLE: License:[chars] unavailable, service exiting. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 142
. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(2a). Deprecated Cisco MDS SAN-OS Release 1.3(4a). FDMI Messages This section contains the Fabric-Device Management Interface (FDMI) messages. 2-106 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 143
BAD_FRAME: Malformed frame received: [chars]. Explanation The Fabric-Device Management Interface (FDMI) process received malformed frame. The error message describes the problem. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FDMI-3-BAD_RESPONSE - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 144
and transaction service (MTS) opcode is specified in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FDMI-3-NO_RESPONSE: No response from switch whose domain id is [dec]. Explanation The Fabric-Device Management Interface (FDMI - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 145
service (MTS) opcode is specified in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). FDMI-6 Error Message FDMI-4-SW_REJ_RESPONSE: Reject response [chars] from switch whose domain id is [dec]. Explanation The Fabric-Device Management - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 146
shutting down: [chars]. Explanation FICON manager is shutting down. Recommended Action This is a severe error. Provide the reason given in the message to your customer service representative. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-110 Cisco MDS 9000 Family System Messages Reference OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 147
assigned to physical and logical cannot overlap. Recommended Action Check the port numbers in the command. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-3-E_ASSIGN_PN_NOT_DOWN_FAIL: [chars]. Explanation Only port number assigned to a port in the down state can be removed or changed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 148
port numbers in the configuration. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-5-STARTING: FICON manager process starting. Explanation FICON manager process is being started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-112 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 149
Cisco MDS SAN-OS Release 1.3(3). Error Message FICON-6-PORT_SWAP: port number [dec] [dec] swapped. Explanation FICON port numbers swapped. Recommended Action No action is required. Introduced Cisco MDS Introduced Cisco MDS SAN-OS Release 1.3(1). FLOGI Messages This section contains the fabric login - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 150
, or show module command (or use an equivalent Fabric Manager/Device Manager procedure) to help determine why this Nx port logged out. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). FSPF Messages This - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 151
Action FSPF daemon has received a bad FC frame. Provide the output of the debug fc2 pkt CLI command to your customer service representative.You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 152
fspf error CLI command to your customer service representative. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF-3-LOCK_FAIL: FSPF failure in gaining lock. Explanation There is a problem with locking a shared resource between Fabric Shortest Path First (FSPF) threads. Recommended - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 153
debug fspf route CLI commands if the problem is reproducible. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message Fabric Shortest Path First (FSPF) threads. Recommended Action Provide the output of the debug fspf all CLI command to your customer support representative. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 154
of debug fspf fc pkt CLI command. If the reason is checksum failure, investigate for possible packet corruption or truncation. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-118 Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 155
use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN problem persists, provide the output of the show fspf VSAN [dec] interface and debug fspf fc pkt and debug fspf event VSAN [dec] commands to your customer support representative. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 156
Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF-6-INTF_OPER_DOWN: Down on interface [chars] in VSAN [dec]. Explanation Fabric will be deleted from all the connected switches. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 157
change. If the situation persists, the domain assignment of switches may not be unique. Recommended Action If this message is received continuously, check if the domain assignment is unique in the fabric. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF-6-STATE_CREATED: Internal - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 158
, IKE will exit. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IKE-3-FIPS_MODE_ERROR: Could - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 159
found for peer [chars]. Explanation There is an IPsec policy mismatch for the peer. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IKE-3-IKE_PROGRAM_EXIT: [chars]. Explanation The Internet Key Exchange (IKE) process experienced an abnormal exit - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 160
(IKE) received an invalid payload. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). IKE-6 Error Message IKE-4-UNSUPPORT: [chars] is not supported (message from [chars]). Explanation Internet Key Exchange (IKE) received something unsupported. Recommended - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 161
card will be rebooted. Recommended Action Install the appropriate SSE license so you can use the Storage Services Module (SSM) features. Introduced Cisco MDS SAN-OS Release 2.1(1a). ILC_HELPER-3 Error Message ILC_HELPER-3-INVALID_BOOTVAR: Invalid [chars] boot variable configured. The linecard will - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 162
The intelligent line card SPAN manager encountered an error. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 163
verify the state of this module. Enter the install module CLI command or use a similar Fabric Manager/Device Manager procedure to retry the image download. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IMAGE_DNLD-SLOT#-2-IMG_DNLD_FILE_SYSTEM_CHECK_ERROR: File System check failed: [chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 164
has completed. The module should now be installing this new image. Recommended Action This message is informational only. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message IMAGE_DNLD-SLOT#-5-ADDON_IMG_DNLD_STARTED: Addon module image download process started. [chars]. Explanation The add - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 165
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 166
access control list caused failures in other services. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). IPACL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 167
Check if the system is low on memory; if so reset the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPCONF-3-FILE_WRITE_FAILED: Writing to file [chars] failed - error: [chars]. Explanation The IP configuration manager failed to write to a file. This is probably because the file - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 168
[chars] has been deleted. Explanation The specified interface has been deleted. The service will delete all the configuration in that interface. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPCONF-6-INTERFACE_EVENT: IP address [chars] [chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 169
is correct and the outgoing interface is operationally up. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPCONF-6-STARTING: IP configuration Manager started. Explanation The IP configuration manager service has successfully started. Recommended Action No action is required. Introduced - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 170
status. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). Fiber Channel service started. Explanation The service successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 171
chars]. Explanation The IP service (IPS) initialization failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 172
got an ERA 35. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-3-FCIP_FTA_ERA_38: ERA 0x38 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 173
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 174
. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). 2-138 Cisco MDS 9000 Family System Messages Reference OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 175
merging iSLB CFS fabrics. The reason for the failure is listed in the message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 176
. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). 2-140 Cisco MDS 9000 Family System Messages Reference OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 177
iSLB zone set activation failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). IPS-4 Error Message IPS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 178
license usage command or a similar Fabric Manager procedure. Acquire the necessary FCIP license. Introduced Cisco MDS SAN-OS Release 3.0(1). IPS-5 The FCIP interface bind to the Ethernet port failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 179
[hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [hex]. Explanation FCIP disbanded a group. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-5-FCIP_FTA_ERA_90: ERA 90 rcvd CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 180
] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [hex]. Explanation FCIP resigned a group. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-5-FCIP_FTA_RESP_3490: 3490 device discovered by FCIP CH FCID: [hex] CHI: [hex] device at CU FCID [hex - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 181
Non-Last VSAN, [chars] VSAN: [hex]. Explanation FTA was turned off for the non-last Vsan. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-5-FCIP_FTA_TURN_ON: Turn ON FTA, [chars] VSAN: [hex]. Explanation FTA was turned on. Recommended Action No - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 182
already in use. Explanation FCIP and iSCSI interfaces are trying to use the same local port. Recommended Action Use different ports. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPS-5-ISCSI_BAD_DATA_DIGEST_CRC: iSCSI ingress data digest error from initiator [chars] alias [chars] S_ID - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 183
[chars] alias [chars] ip [chars] target [chars]. FC session failed over to port [chars]. Explanation The FC session for the iSCSI session failed over to a newly active port. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-5-ISCSI_SB_GET_TGT - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 184
match the configuration on the peer. Recommended Action Fix the FCIP write acceleration configuration to be consistent with the peer. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IPS-5-IPS_IPACL_LOG_MSG: [chars]. Explanation The message lists details of the packet dropped due to ACLs - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 185
chars]: iSCSI Explanation The Fibre Channel session for the iSCSI session failed over to newly active port. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(2a). Error Message IPS-5-ISCSI_SESSION_CREATE_FAILURE: [chars]: iSCSI Session initiator [chars] target [chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 186
mismatch. Explanation A special frame was received, and the source or destination fabric WWN does not match the local destination or source fabric WWN. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message IPS-5-SFRAME_IF_ADMIN_DOWN: [chars]: special - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 187
The Internet Storage Name Service (iSNS) server returned an error for a register or deregister request. For select error codes, the ISNS client would retry and re-register all target nodes corresponding to the interface. Recommended Action No action is required. Cisco MDS 9000 Family System - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 188
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(2a). Error Message IPS_SB_MGR-SLOT#-2-PORT_SOFTWARE_FAILURE: Port software failure, module [dec] port [dec]. Explanation The software servicing the data path on - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 189
to the sibyte manager. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 190
to the sibyte manager. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 191
line card. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release 1.3(2a). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 192
Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release 1.3(2a). IPS_SB_MGR-SLOT#-6 Error Message IPS_SB_MGR-SLOT#-6-SBMGR_EVENT: Sbmgr event: [chars]. Explanation This is an event log of the sibyte manager relating to a port - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 193
to the sibyte manager. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 194
/port> CLI command or use a similar Fabric Manager/Device Manager procedure to collect drop statistics. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 195
IPsec is disabled because the license expired. Recommended Action Install an updated, valid license to continue using this feature. Introduced Cisco MDS SAN-OS Release 2.1(1a). IPsec-6 Error Message IPSEC-5-IPSEC_ENABLED: IPSec Enabled. Explanation IPsec is enabled. Recommended Action No action is - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 196
chars]/[chars]. Explanation IPsec tunnel rekeyed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). ISAPI Messages This section contains the intelligent switch application programming interface (ISAPI) messages. ISAPI-SLOT#-0 Error Message ISAPI-SLOT#-0-ILC_EMERG - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 197
ISAPI-SLOT#-1 Error Message ISAPI-SLOT#-1-ILC_ALERT: [chars]. Explanation This is an intelligent switch API alert software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ISAPI-SLOT#-1-INVISTA_ALERT: [chars]. Explanation Isapi-invista - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 198
-OS Release 3.2(1). Error Message ISAPI-SLOT#-1-SSM_ALERT: [chars]. Explanation This is an intelligent switch API alert software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message ISAPI-SLOT#-1-SSM_ALERT: [chars]. Explanation Isapi software - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 199
ISAPI-SLOT#-3 Error Message ISAPI-SLOT#-3-ILC_ERROR: [chars]. Explanation This is an intelligent switch API error software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ISAPI-SLOT#-3-INVISTA_ERROR: [chars]. Explanation Isapi-invista - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 200
). ISAPI-SLOT#-4 Error Message ISAPI-SLOT#-4-ILC_WARN: [chars]. Explanation This is an intelligent switch API warning software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ISAPI-SLOT#-4-INVISTA_WARN: [chars]. Explanation Isapi-invista - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 201
ISAPI-SLOT#-5 Error Message ISAPI-SLOT#-5-ILC_NOTICE: [chars]. Explanation This is an intelligent switch API notice software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ISAPI-SLOT#-5-INVISTA_NOTICE: [chars]. Explanation Isapi-invista - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 202
). ISAPI-SLOT#-7 Error Message ISAPI-SLOT#-7-ILC_DEBUG: [chars]. Explanation This is an intelligent switch API debug software message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ISAPI-SLOT#-7-INVISTA_DEBUG: [chars]. Explanation Isapi-invista - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 203
Name Service (ISNS) initialization failed. ISNS is automatically restarted. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 204
Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] of sync. with this peer. We recommend that you discard this CFS session using ivr abort command and then re-enter the configuration changes. You can alternatively use Fabric Manager and/or Device - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 205
range allowed for this interop mode. Refer to the Cisco MDS 9000 Family CLI Configuration Guide or Cisco MDS 9000 Family Fabric Manager Configuration Guide for details on the domain range limitations. Recommended Action Change the domain of the switch to which this IVR zone member is connected so - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 206
License required for continued IVR operation is not available. IVR is shutting down. Recommended Action Install the appropriate license for IVR services and then enable IVR again. Introduced Cisco MDS SAN-OS Release2.0(1b). 2-170 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 207
services within the shown seconds to continue uninterrupted operation. Introduced Cisco MDS switch) or not allowed because of the interop mode or allowed domain list configured. Recommended Action Verify that the configured virtual domain/FC ID is allowed and available for use. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 208
. Recommended Action If the problem persists, contact your support representative. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(2a - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 209
that the configuration is inconsistent in the fabric. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 210
if FICON is enabled on VSANs and native switch of device with port WWN is not present in the current active fabric binding database of those VSANs. This is a requirement for FICON compliance. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IVR - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 211
range allowed for this interop mode. Refer to the Cisco MDS 9000 Family CLI Configuration Guide or Cisco MDS 9000 Family Fabric Manager Configuration Guide for details on the domain range limitations. Recommended Action Change the domain of the switch to which this IVR zone member is connected so - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 212
. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-176 Cisco MDS 9000 Family System Messages Reference OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 213
purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IVR-3-MTS_ERROR: MTS message transmission failed with error [dec]. Explanation IVR process unsuccessfully tried to send a messaging and transaction service (MTS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 214
of AFID/VSAN combination is more than the maximum supported value of 128, or (b) number of IVR-enabled switches is more than the maximum supported value of 128. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message IVR-3-UNEXPECTED_MTS_MSG: Unexpected - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 215
in the error message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IVR-3-VSAN_SEGMENTED - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 216
chars]. Explanation Merge failed because of a conflict in the persistent virtual FC ID configuration. Recommended Action Check the configuration and resolve merge issues. Introduced Cisco MDS SAN-OS Release 2.1(2). Error Message IVR-4-QOS_IOD_UNDROP_REQUEST_TO_ACL_FAILED_AND_RETRYING: qos iod undrop - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 217
: FCID network address translation (NAT) mode has been activated. Explanation FC ID Network Address Translation (NAT) mode has been activated. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message IVR-5-FCID_NAT_MODE_DEACTIVATED: FCID network address - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 218
. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(3). Error Message IVR-5-IVZS_WAITING_FOR_LOWEST_SWWN: Waiting for lowest switch WWN Inter-VSAN enabled switch in VSAN [dec]. Explanation This switch does not have the lowest switch world wide name (sWWN) in the VSAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 219
it is successful in all VSANs by entering the show ivr zone set status command or use a similar Fabric Manager/Device Manager procedure. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message IVR-5-LICENSE_CHECKIN_FAILED: Failed to checkin [chars] license: Err=[chars]. Explanation Failed to check - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 220
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IVR-5-SERVICE_GROUP_ACTIVATED: Inter-VSAN Service Group has been activated. Explanation Inter-VSAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 221
is being made to resend the DRAV FSM frames. The details are shown in the message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message IVR-6-DRAV_DOMAIN_ALLOC: Virtual domain [dec] for Native AFID: [dec] Native VSAN [dec]. Explanation A virtual domain - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 222
. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-186 Cisco MDS 9000 Family System Messages Reference OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 223
The line card switched port analyzer (LC-SPAN) manager encountered an error. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 224
: could not lookup port index for interface [chars]. Explanation Could not look up the port index. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 3.0(1). 2-188 Cisco MDS 9000 Family System Messages - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 225
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] LC_PORT_MGR Messages This section contains the line card port manager (LC_PORT_MGR) messages. LC_PORT_MGR-SLOT#-2 Error Message LC_PORT_MGR-SLOT#-2-LC_MTS_ERROR: - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 226
: : [chars]. Explanation The line card remote domain lookup (LC_RDL) messaging and transaction service (MTS) errors occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). LC_RDL-6 Error Message LC_RDL-3-SYSLOG_MTS_REG_FAILED: : [dec] [dec]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 227
License manager is now exiting. The reason for the exit is shown in the message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 228
allowed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(3). Deprecated Cisco MDS SAN-OS Release 1.3(4b). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 229
on the shown node and service access point (SAP). Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 230
command or use a similar Fabric Manager/Device Manager procedure to verify this license feature installation. Introduced Cisco MDS SAN-OS Release 1.3(4a). switch is installed on another switch. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 231
Installed the named license file. Recommended Action Enter the show license command or use the similar Fabric Manager/Device Manager procedure to verify this license installation. Introduced Cisco MDS SAN-OS Release 1.3(4a). MAC Messages This section contains the MAC messages. MAC-SLOT#-2 Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 232
component cannot restart properly, contact your support representative. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). MCAST - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 233
in the runtime diagnostic. Module manager is going to power cycle the module. Recommended Action Collect information about the module by entering the show module internal all module [decimaldigit] CLI command or by using a similar Fabric Manager procedure. OL-15956-01 Cisco MDS 9000 Family System - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 234
all module command or by using a similar Fabric Manager procedure. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message MODULE-2-MOD_MINORSWFAIL: Module [dec] reported a failure in service [chars]. Explanation A non-critical failure in the service occurred on the module. The module will not - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 235
of the ports. Recommended Action Collect module information by entering the show module internal all module CLI command or by using a similar Fabric Manager procedure. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message MODULE-2-MOD_UNKNOWN: Module type [[dec]] in slot [dec] is not supported - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 236
the show module internal all xbar [decimaldigit] CLI command or by using a similar Fabric Manager procedure.' Introduced Cisco MDS SAN-OS Release 3.0(1). MODULE-3 Error Message MODULE-2-XBAR_UNKNOWN: Xbar type [[dec]] in slot [dec] is not supported. Explanation The software card ID of xbar is not - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 237
by using a similar Fabric Manager procedure. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 2.0(1b). Error Message MODULE-5-MOD_OK: Module [dec] is online (serial: [chars]). Explanation Module named is ready to be configured and to switch traffic. Recommended Action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 238
be configured and to switch traffic. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release ports. Recommended Action Collect module information by entering the show module internal all module [dec] command or by using a similar Fabric Manager procedure. 2-202 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 239
or by using a similar Fabric Manager procedure. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 2.0(1b). Error Message MODULE-5-STANDBY_SUP_OK: Supervisor [dec] is standby. Explanation Module is ready to be configured and to switch traffic. Recommended Action No - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 240
: VSAN :[dec] VT pWWN :[chars] VT and NPort creation FAILED !!!. Explanation The virtual target and N port creation failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). 2-204 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 241
where the virtual target is configured is down. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). NPC Messages This section contains the N port creator (NPC) messages. NPC-SLOT#-3 Error Message NPC-SLOT#-3-LOG_NPC_ERR: Nonrecoverable error: [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 242
NPC-SLOT#-5-LOG_NPC_VSAN_FSM: Illegal event received: [chars]. Explanation Illegal event received in the N port creator virtual N port (NPC_NVP) finite state machine (FSM). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). NPV Messages This section contains the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 243
Message NPV-3-FC2_SEND_FAILED: [chars]. Explanation NPV process could send an FC2 message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message NPV-3-FRAME_DISCARDED: [chars]. Explanation NPV process discarded an FC2 frame. Recommended Action No action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 244
NPV-3-PORT_BRINGUP_FAILED Explanation NPV process has failed to bring up the port. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message NPV-3-PORT_REINIT_FAILED Explanation Port reinit request initiated by the NPV process has failed. Recommended Action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 245
interface to forward either all frames received on a server interface or frames received from a specific port WWN. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message NPV-6-LS_ACC_RCVD: [chars]. Explanation NPV process received an LS_ACC frame - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 246
Release 3.2(1). Error Message NPV-6-FLOGI_RCVD Explanation NPV process received an FLOGI frame. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message NPV-6-LC_ACC_SENT Explanation NPV process sent a LS_ACC frame. Recommended Action No action is required - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 247
OS Release 3.2(1). Error Message NPV-6-MTS_REQ_RCVD Explanation NPV process received an MTS request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message NPV-6-MTS_REQ_SENT Explanation NPV process received an MTS request. Recommended Action No action is - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 248
.com Error Message NPV-6-SERVER_PROXY_LOGO_SENT Explanation NPV process sent a LOGO frame to core switch. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). NTP Messages This section contains the Network Time Protocol (NTP) messages. NTP-2 NTP-3 Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 249
NTP-6 Error Message NTP-3-NTP_SYSLOG_MTS_ERR: : [chars]. Explanation Network Time Protocol (NTP) messaging and transaction service (MTS) error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message NTP-6-NTP_SYSLOG_CREATED: : [chars]; Slot No: [dec - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 250
action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message NVP-6-STARTING: deamon started. Explanation The virtual N port (NVP) daemon successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-214 Cisco MDS 9000 Family System - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 251
to collect more information or use a similar Fabric Manager procedure. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-0-CHASSIS_CLKSW_MODULE_RESET: Modules reset due to clock switch. Explanation The chassis clock source has been switched and all Generation 1 line cards will be - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 252
threshold still exceeded. Recommended Action Enter the show env temperature CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-0-MOD_TEMPSHUTDOWN: Module [dec] powered down due to major - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 253
in the error message. Recommended Action Enter the show env temperature CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-0-SYS_SHUTDOWN: System shutdown in [dec] seconds due to major - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 254
and temperature alarms. Recommended Action Enter the show platform internal info CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message PLATFORM-1-FAN_FAIL: Fan module Failed. Explanation Fan module - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 255
env power CLI command or by using a similar Fabric Manager/Device Manager procedure. Refer to power supply documentation in the relevant hardware installation guide to learn how to increase power supply capacity. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-1-MDS9124_FAN_FAIL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 256
been removed. Recommended Action Enter the show platform internal info CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-2-CHASSIS_CLKMODOK: Chassis clock module [dec] ok. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 257
collect more information, or use a similar Fabric Manager procedure. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message PLATFORM-2- least one exbar module has to be up for switch modules to function. Introduced Cisco MDS SAN-OS Release 3.0(1).' Error Message PLATFORM-2-MOD_PWRDENY: - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 258
temperature threshold. Recommended Action Enter the show env temperature CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-2-MOD_TEMPOK: [chars] recovered from minor temperature alarm - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 259
has been powered down because the card is not supported in this chassis. Recommended Action Use the show module CLI command to see the power down reason, or use a similar Fabric Manager procedure.' Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message PLATFORM-2-PFM_NETBOOT_DISABLE: Netboot for - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 260
version of EPLD can result in unexplained behaviour. Recommended Action Upgrade the power managment EPLD. Refer to the Cisco MDS 9000 Family CLI Configuration Guide. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message PLATFORM-2-PFM_STDBY_POWERUP_FAIL: standby supervisor failed to power up - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 261
or use a similar Fabric Manager or Device Manager procedure to collect more information. See the power supply documentation in the relevant hardware installation guide to learn more on increasing or decreasing power supply capacity and configuring power supplies. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 262
Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS support representative to replace the unit. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-2-PS_UNKNOWN: Detected an unknown power supply [dec] for CISCO MDS 9500/9200 Multilayer Switches - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 263
CISCO MDS 9500/9200 Multilayer Switches (Serial number [chars]). Explanation This power supply is not supported for the Cisco MDS 9500 or 9200 series of switches. Recommended Action Refer to the appropriate product hardware installation guide similar Fabric Manager procedure. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 264
and show sprom xbar [dec] [dec] to read module IDPROM contents to collect more information (or use a similar Fabric Manager procedure). Introduced Cisco MDS SAN-OS Release 3.0(1). PLATFORM-4 Error Message PLATFORM-4-MOD_TEMPFAIL: [chars] temperature sensor [dec] failed. Explanation The module in the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 265
] and show module internal all module [dec] CLI commands or use similar Fabric Manager/Device Manager procedure to collect more information if you suspect the module has been powered down because of errors. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-5-MOD_PWRUP: Module [dec - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 266
major temperature threshold. Recommended Action Enter the show env temperature CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-5-PS_CAPACITY_CHANGE: Power supply PS[dec] changed its - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 267
exceeded a major threshold. Recommended Action Enter the show env temperature CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-5-XBAR_DETECT: Xbar [dec] detected (Serial number [chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 268
due to context-switch delay of [dec] msec. Explanation System will shut down in seconds because of a clock update failure. Recommended Action Enter the show env temperature CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 269
or use a similar Fabric Manager/Device Manager procedure to determine the transceiver being used. Contact your customer support representative for a list of authorized transceiver vendors. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-EC_DISABLED_AS_LICENSE_NOT_PRESENT: Extended - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 270
Enter the CLI commands config terminal, interface, no shutdown or use a similar Fabric Manager procedure to bring up the interface. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_BIT_ERR_RT_THRES_EXCEEDED: Interface [chars] is down (Error disabled - bit error rate too high - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 271
the interface up by entering the no shutdown CLI command or by using a similar Fabric Manager procedure. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_CHANNEL_MEMBERSHIP_UPDATE_IN_PROGRESS: Interface [chars] is down (Channel membership update in progress). Explanation The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 272
2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-5-IF_DOWN_DOMAIN_MANAGER_DISABLED: Interface [chars] is down (Isolation due to domain manager disabled). Explanation The interface is isolated because - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 273
port internal info CLI command or use a similar Fabric Manager/Device Manager procedure to check the ELP failure reason field. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT switch port correctly and try again. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5- - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 274
of an invalid transmit B2B credit. Recommended Action Configure the attached switch port correctly and try again. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_RATOV_EDTOV_MISMATCH: Interface [chars] is down (Isolation due to ELP failure: R_A_TOV - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 275
Exchange switch parameter (ESC) failed on the interface. Recommended Action Enter the show port internal event-history CLI command or use a similar Fabric Manager/Device Manager procedure to determine the ESC protocol exchanges to determine how it failed. OL-15956-01 Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 276
: Interface [chars] is down(Isolation due to fabric bind failure). Explanation Fabric binding failed on this port. Recommended Action Check the fabric binding database to ensure that the remote port is allowed to connect to this port. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 277
internal all module command or use a similar Fabric Manager procedure to collect more information about the failed module. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_INACTIVE: Interface [chars] is down (Inactive). Explanation The port VSAN has been suspended or deleted - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 278
speed). Explanation The configured speed is not supported on this interface. Recommended Action Enter the show port internal info command or use a similar Fabric Manager procedure to determine the range of speed supported on this interface. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 279
any PortChannel. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message PORT-5-IF_DOWN_INVALID_FABRIC_BINDING: Interface [chars] is down(Invalid fabric binding exchange). Explanation Fabric binding failed. Recommended Action Check the fabric binding database. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 280
use a similar Fabric Manager procedure to connect to the module to collect more information about the failed interface. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_LOOPBACK_ISOLATION: Interface [chars] is down (Isolation due to port loopback to same switch). Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 281
down. Recommended Action Ensure that the cable is connected and the remote end is not shut down. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT-5-IF_DOWN_NO_TRUNK_OPER_VSANS_ISOLATION: Interface [chars] is down(Isolation due to no common VSANs with peer on trunk). Explanation The TE - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 282
the show interface command or use a similar Fabric Manager procedure to provide the peer IP address of this FCIP interface. Check to see why the peer closed the TCP connection. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_PEER_RESET: Interface [chars] is down(TCP conn - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 283
same and enter the shutdown and no shutdown CLI commands or use a similar Fabric Manager/Device Manager procedure to bring up the ports. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_RCF_IN_PROGRESS: Interface [chars] is down (RCF in progress). Explanation There is an RCF - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 284
CLI commands or by using a similar Fabric Manager/Device Manager procedure. If this happens again, enter the show port internal all interface command or use a similar Fabric Manager procedure on the interface to gather more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 285
remote switch as all the other interfaces in the PortChannel. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_DOWN_TCP_KEEP_ALIVE_EXPIRED Fabric Manager/Device Manager procedure to check the connectivity to the peer. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 286
(HBA) and enter the shutdown and no shutdown CLI commands or use a similar Fabric Manager/Device Manager procedure on the port. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message PORT-5-IF_DOWN_TOO_MANY_INTR: Interface [chars] is down (Error disabled - too many interrupts). Explanation The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 287
event-history interface vsan CLI commands or use a similar Fabric Manager/Device Manager procedure to determine why this VSAN is down on this interface. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT-5-IF_TRUNK_UP: Interface [chars], VSAN [chars] is up. Explanation The interface - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 288
be in an indeterminate state. Recommended Action Reload the module. Introduced Cisco MDS SAN-OS Release 3.1(1). PORT-Resources Messages This section contains the port resources (PORT-RESOURCES) messages. Error Message PORT-RESOURCES-3-PRM_MSG_SEND_FAILURE: failed to send [chars] to sap [dec]: [chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 289
reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT-SECURITY-2-FEATURE_DISABLED: Feature [chars] disabled due to - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 290
support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT-SECURITY-3-EFMD_FC2_OPER_FAILED: [chars]. Explanation The exchange fabric membership data (EFMD) Fibre Channel Layer 2 (FC - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 291
purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT-SECURITY-3-INIT_FAIL: [chars]. Explanation An error happened during port security manager initialization. The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 292
Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PORT-SECURITY-3-PSS_ERR: [chars]. Explanation An error occurred during a port security manager persistent storage service (PSS) operation. The error message indicates - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 293
reset. If the problem persists, contact your customer support representative. Introduced Cisco MDS SAN-OS Release port-channel consistency CLI command or use a similar Fabric Manager/Device Manager procedure to check consistency. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 294
to a PortChannel. Recommended Action Make sure the compatibility parameters are consistent while adding ports to a PortChannel, or use the force option. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT_CHANNEL-3-GENERAL_ERROR: [chars]. Explanation General error. Recommended Action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 295
Some operation timed out. Recommended Action Execute the show port-channel consistency CLI command or use a similar Fabric Manager/Device Manager procedure to check all module connectivity and consistency. Introduced Cisco MDS SAN-OS Release 1.2(2a). PORT_CHANNEL-4 Error Message PORT_CHANNEL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 296
failed to come online because port channel interface - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 297
]: [chars] is down. Explanation Port went down in a PortChannel. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error manager finished global synchronization. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 298
1.2(2a). Error Message PORT_CHANNEL-7-START_STANDBY: started in standby mode. Explanation PortChannel manager started in standby mode. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PORT_CHANNEL-7-START_STATEFUL: started statefully. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 299
prevent this. This violating device or switch will be logged out. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT_SECURITY-3-BINDING_VIOLATION: [chars] in VSAN [dec]. Explanation A login occurred that violates the port security manager (PSM) binding configuration. The error message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 300
reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT_SECURITY-3-INIT_FAIL: [chars]. Explanation An error happened during the port security manager initialization. The error message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 301
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT_SECURITY-3-PSS_ERR: [chars]. Explanation An error occurred during a port security manager persistent storage service (PSS) operation. The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 302
9000 Family Send documentation comments to [email protected] Error Message PORT_SECURITY-6-INFO: [chars]. Explanation An event happened that affects the port security manager. The error message indicates the event. Introduced Cisco MDS SAN-OS Release 1.3(4a). PROC_MGR Messages This section - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 303
SAN-OS Release 1.2(2a). Error Message PROC_MGR-SLOT#-2-PROC_MGR_INFO: [chars]. Explanation Process manager informational message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PROC_MGR-SLOT#-2-PROC_MGR_MTS_CORE_CLIENT_FAIL: ERROR: MTS message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 304
Message PROC_MGR-SLOT#-2-PROC_MGR_TERM_TIME: * Termination took [dec] sec [dec] usec *. Explanation Process manager termination time. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PROC_MGR-SLOT#-2-PROC_MGR_UT_PEEK_FAIL: ERROR: Unable to peek on - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 305
] [dec]: Failed to take utaker semaphore: [dec]. Explanation Utaker semaphore take failed. Recommended Action Restart the line card. Introduced Cisco MDS SAN-OS Release 1.2(2a). PROC_MGR-SLOT#-4 Error Message PROC_MGR-SLOT#-4-PROC_MGR_APP_NOT_RESP: ERROR: Process ([chars]) is not responding, it will - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 306
working pages. Explanation Service needs more working page buffers. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 307
: [chars]: cannot read meta page from [chars]: [chars]. Explanation The persistent storage service cannot read the meta page of a database. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PSS-1-PSS_STAT_ERROR: [chars]: cannot stat [chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 308
use a similar Fabric Manager procedure as a last recourse to clear this problem. Introduced Cisco MDS SAN-OS Release 1.2(2a). PSS-2 Error Message PSS-2-PSS_INVALID_SIZE: [chars]: database [chars] ([chars]) has invalid size [dec] (block size [dec]). Explanation The persistent storage service found - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 309
layout: [chars] (params [dec]/[dec]/[dec] -] [dec]/[dec]/[dec]). Explanation The persistent storage service layout is being converted. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PSS-5-PSS_SHRINK: [chars]: shrinking pss: [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 310
Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message QOS-2-PSS_ERROR: [chars]: PSS returned value=[dec]. Explanation The QoS manager - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 311
Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message QOS-3-E_PORT_ACL_FAILURE: Failed to [chars] QOS ACL for interface [chars] (ACL return code=[hex]). Explanation The QoS manager failed to program or erase a QoS related ACL when an E port came up or went down for - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 312
the context where the error occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message QOS-3-PSSERROR: [chars]. Explanation QoS manager encountered a persistent storage service (PSS) error. The error message specifies the context where the failure - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 313
the error message.This information is for debugging only. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). QOS-4 QOS-6 Error Message QOS-4-LICEXP: [chars]. Explanation QoS manager license is going to expire. The error message gives the expected time of expiry - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 314
QOS ACL for interface [chars]. Explanation The QoS manager has successfully programmed or erased QoS related ACL when an E port came up or went down for the interface shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message QOS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 315
client requests The service was initialized in the mode shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release . Error Message QOS-6-SWITCHOVER: Switching Over to other Supervisor. Explanation The QoS manager has successfully switched over to the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 316
an unexpected message. Explanation QoS Manager received an unexpected message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). RADIUS Messages This section contains the Remote Authentication Dial-In User Service (RADIUS) messages. RADIUS-2 RADIUS-3 Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 317
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message RADIUS-6-RADIUS_MESSAGE: [chars]. Explanation RADIUS message. Recommended Action No action is required. - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 318
Message RDL-3-SYSLOG_ERR: : [chars]. Explanation The remote domain lookup (RDL) syslog errors. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message RDL-3-SYSLOG_EXIT: : [chars]. Explanation The remote domain lookup (RDL) exiting on errors. Recommended - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 319
Error Message RDL-3-SYSLOG_MTS_ERR: : [chars]. Explanation The remote domain lookup (RDL) messaging and transaction service (MTS) errors. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). RDL-6 Error Message RDL-6-SYSLOG_DEBUG_1: : [chars] [hex]. Explanation The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 320
Base (RIB) caused failures in other services. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). RIB-3 Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 321
contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message RIB-3-MISS_APPS: Missing response from service. Explanation Service not responding to the Routing Information Base (RIB). Recommended Action Enter the debug rib error command, or use a similar Fabric Manager - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 322
RIB was busy, and RIB did not service the message or timer queue for an extended period. Recommended Action Enter the debug rib error command, or use a similar Fabric Manager procedure, then recreate the operation scenario to find out more details. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 323
The Routing Information Base (RIB) does not support this operation. Recommended Action Enter the debug rib all command, or use a similar Fabric Manager procedure, then recreate the operation scenario to find out more details. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message RIB - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 324
(FC-2) operation failed: [chars] [chars]. Recommended Action No action is required. Introduced Cisco MDS Cisco MDS SAN-OS Release 1.3(1). Error Message RLIR-2-LINK_INCIDENT: Interface [chars] [Port service (MTS) operation failed. Recommended Action No action is required. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 325
]. Explanation Registered Link Incident Record (RLIR) syslog status. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). RM Messages This section contains the resource manager (RM) messages. RM-6 Error Message RM-6-RMGR_INFO: [chars]. Explanation This is a resource - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 326
failed: [chars]: [chars]. Explanation The Registered State Change Notification (RSCN) Fibre Channel Layer 2 (FC-2) operation failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message RSCN-2-INIT_FAILED: RSCN Init failed: [chars]. Explanation The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 327
RSCN) messaging and transactional services (MTS) operation failed Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a was rejected. The FC ID and reason code are shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 328
code expl-[chars]. Explanation The Registered State Change Notification (RSCN) was rejected. The FC ID and reason code are shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). RSCN-4 RSCN-6 Error Message RSCN-4-SWRSCN_REJECT: SW-RSCN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 329
Explanation Messaging and Transaction Service (MTS) operation failure. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 330
input/output to the persistent storage service (PSS). Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-294 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 331
removed from the system. Recommended Action Ensure that the user exists. Make sure the user is not remotely authenticated. Introduced Cisco MDS SAN-OS Release 2.0(1b). SCHEDULER-4 Error Message SCHEDULER-4-SCH_WARN: [chars]. Explanation Scheduler warning. Recommended Action No action is required - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 332
cpu and show system internal sysmgr service all commands or use a similar Fabric Manager/Device Manager procedure to collect further information. See WWN Manager system error codes for the reason. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-296 Cisco MDS 9000 Family System Messages Reference - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 333
used. Enter the show process cpu and show system internal sysmgr service all commands or use a similar Fabric Manager/Device Manager procedure to collect more information. See the VSAN Manager system error codes for the reason. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message SCSI target - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 334
persistent storage service (PSS) reload runtime database failed because of the error listed. Recommended Action Enter the show flash command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes for reason. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 335
storage service (PSS) store runtime entry key failed because of the error shown in the error message. Recommended Action Enter the show flash command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes for the reason. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 336
FIPS Bypass self-test status : [chars]. Explanation Status of the FIPS self-test. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message SECURITYD-2-FIPS_CRNG_SELF_TEST_STATUS: FIPS CRNG self-test status : [chars]. Explanation Status of the FIPS self-test - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 337
log cannot be stored. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). SECURITYD-6 Error Message SECURITYD - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 338
is [chars] for service [chars]. Explanation FIPS mode is changed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Sensor Manager syslog message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-302 Cisco MDS 9000 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 339
: Sensor Mgr Error in queuing to pending queue: [dec], Error code = [dec]. Explanation Sensor manager syslog message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Error Message SENSOR-3-SNSM_SYS_MTS_RECV_FAILURE: Sensor Mgr Error in receving - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 340
: Sensor Mgr Error in processing MTS message: [dec], Error code = [dec]. Explanation Sensor manager syslog message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SENSOR-5-SNSM_SYSLOG_STARTING: Sensor Mgr process started. Explanation Sensor - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 341
shutting down: [chars]. Explanation This is an informational message indicating that the Sensor Manager is shutting down. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message SENSOR_USD-2-SNSM_SYSYLOG_ALLOC_MEMORY: Sensor Mgr Memory allocation failed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 342
and transaction service (MTS). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). SENSOR_USD-5 Error Message SENSOR_USD-5-SNSM_SYSLOG_STARTING: Sensor Mgr process started. Explanation This is an informational message indicating the Sensor Manager process began - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 343
If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). SFM Messages This section contains the SCSI Flow Manager (SFM) messages. SFM - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 344
because another SME cluster (name , id %llx) already exists. Explanation A switch can be part of only one SME cluster. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(2). Error Message SME_CPP-3-LOG_ERR_SME_INTF_MISMATCH_CLUSTER_PARAMS: SME interface [chars] part - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 345
on a different switch or module. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release No action is required. Introduced Cisco MDS SAN-OS Release 3.2(2). Error Message SME_CPP-5-SME_DISABLED: SME Disabled. Explanation SME service is Disabled. Recommended Action No - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 346
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 3.2(2). Error Message SME_CPP-5-SME_ENABLED: SME Enabled. Explanation SME service is enabled. Recommended Action No action is - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 347
Introduced Cisco MDS SAN-OS Release 3.0(1). SPAN Messages This section contains the switched port analyzer (SPAN) messages. SPAN-2 SPAN-3 Error Message SPAN-2-MEM_FULL: Memory allocation failed. Explanation Memory allocation failed. Recommended Action If you purchased Cisco support through a Cisco - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 348
Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(1). Error Message SPAN-3-SYSINFO_TIMEOUT: Span timed out waiting for response from port manager for sys info. Explanation The switched port analyzer (SPAN) request for critical system - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 349
supported. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SPAN-5-SPAN_PSS_CORRUPTION: Span is starting stateless due to pss corruption. Explanation Because of an unrecoverable persistent storage service (PSS) corruption error, the switched port - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 350
by entering the show span session CLI command or by using a similar Fabric Manager/Device Manager procedure. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SPAN-6-SESSION_UP: Session [dec] is active, destination SD port [chars]. Explanation Session is active now. You can monitor spanned - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 351
: [chars]. Explanation Syslog message from a SAN Volume Controller (SVC) interface node. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). SVC-2 Error Message SVC-1-NODE_ALERT_MSG: [chars]. Explanation Syslog message from a SAN Volume Controller (SVC) interface - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 352
either the CLI or Cisco Fabric Manager/Device Manager. Using the CLI, enter the no shutdown command on the SVC interface to bring the port back up. If a subsequent port loopback failure occurs, replace the SVC module. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-316 Cisco MDS 9000 Family System - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 353
error continues, ask your customer support representative for assistance. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_BATT_FAILURE ) Battery Failed [chars]. Explanation The battery module on the Caching Services Module (CSM) has failed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 354
continues, ask your support representative for assistance. It may be necessary to replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release of fatal communication failures with the power management module in the line card or the power management module has crashed. Node was rebooted - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 355
been marked as fixed, manually mark the error as fixed. Introduced Cisco MDS SAN-OS Release 1.3(1). port was detected by the software. Recommended Action Reload the node. If the problem persists, replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 356
operational [chars]. Explanation No active and functioning logical Fibre Channel port was detected by the software. Recommended Action Reload the node. If the problem persists, replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(2a). Error Message SVC-3-NODE_ERR_MSG: (SVC - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 357
disk controller configuration. Recommended Action 1. Using service documentation for the disk controller, check that the correct configuration is set up for the disk controller. See also the IBM TotalStorage SAN Volume Controller for Cisco MDS 9000: Configuration Guide. 2. Mark the error you have - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 358
in Steps 2 and 3. Call your customer support representative. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_VL_ER_IO_ERROR ) Managed Disk I/O error [chars]. Explanation A managed disk or managed disk controller port has been excluded because of - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 359
If no switch or disk controller failures can be found, take an error log dump and call your customer support representative. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_VL_ER_LOCAL_PORT_EXCLUDED ) Local FC port excluded [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 360
a good status, contact the customer support representative to resolve the problem with the disk controller. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] Explanation A managed disk or managed disk controller port has been excluded because of excessive - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 361
problem determination and repair procedures for the managed disks. 3. Start a cluster discovery operation. 4. Check managed disk status. If all managed disks show a status of online, mark the error you have just repaired as fixed. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 362
) Remote Copy partnership created [chars]. Explanation The svctask mkpartnership or equivalent GUI or Cisco CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 363
, ask your customer support representative for assistance. It may be necessary to replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release If the problem persists, replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 364
node is unable to see the FC fabric [chars]. Explanation No active or functioning logical Fibre Channel port was detected by the software. Recommended Action Reload the node. If the problem persists, replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 365
with the latest level of code. 3. If the error continues, ask your customer support representative for assistance. It may be necessary to replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-3-NODE_ERR_MSG: [chars]. Explanation Syslog message from a SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 366
problem determination on the error log to determine the cause of the pinned data and correct. Introduced Cisco MDS replace the Caching Services Module. Introduced Cisco MDS SAN-OS Release customer support representative for assistance. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-330 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 367
Recommended Action If there is a problem executing configuration commands, follow these cluster and should cause the switch to deactivate the IP address support representative for assistance, if the error continues. It may be necessary to replace the Caching Services Module. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 368
Action 1. Ensure that the software is at the latest level on the cluster. 2. Ask your customer support representative for assistance. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_INTERNAL_UNKNOWN_EXEC_MODE ) Internal error - run mode - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 369
Action 1. Ensure that the software is at the latest level on the cluster. 2. Ask your customer support representative for assistance. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_OPEN_MSG_QUEUE_FAILED ) Internal error - message queue - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 370
the cluster and if necessary repeat step 1 with the latest level of code. 3. Ask your customer support representative for assistance, if the error continues. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] Explanation The process cannot warm start - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 371
determine the problem on the remote node. If it is online, retry the command. Contact your customer support representative for assistance if it still fails. Cisco CLI commands or Fabric Manager procedures may be used to access the node directly as an alternative. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 372
the problem on the remote node. If it is online, retry the CLI command or use a similar Fabric Manager procedure. Contact your customer service representative for assistance if it still fails. Cisco CLI commands may be used to access the node directly as an alternative. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 373
the cluster. 3. Retry the software upgrade command. 4. If the installation fails again, report the problem to your customer support representative. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_PLIC_LINK ) Connection to a configured - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 374
Add additional managed disks to the managed disk group or reduce the size of virtual disk to be created. Introduced Cisco MDS SAN-OS problem determination and correct any errors which have occurred. Migrate any specific extents which were not migrated because of the errors. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 375
sufficient errors to generate this warning. If the managed disk continues to experience I/O errors, the managed disk may be excluded. Recommended Action Perform problem determination on the affected managed disk. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-4-NODE_WARNING_MSG: (SVC - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 376
not being used for managed disk access. A port error or excluded port has prevented the use of the preferred port. Recommended Action Perform problem determination on the controller and network to determine the cause of the port error or exclusion. Introduced Cisco MDS SAN-OS Release 1.3(1). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 377
: Interface [chars] is down. Explanation SAN Volume Controller (SVC) interface is down. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). SVC-6 Error Message SVC-5-SVC_SYSLOG_IF_UP: Interface [chars] is up. Explanation SAN Volume Controller (SVC) interface is - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 378
. The node(s) then has to be removed and added back to the cluster. 3. Replace the Caching Services Module, if the error persists. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_PWR_BUTTON ) Power withdrawn [chars]. Explanation Node - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 379
by the user, there is only one node left in the IO group. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_IC_EV_SECURE_DELETE_COMPLETE ) Virtual Disk format completed [chars]. Explanation The formatting - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 380
view has been updated. [chars]. Explanation The node is in the process of discovering devices on the fabric. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_ADD_MAPPING ) Virtual Disk to Host SCSI - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 381
Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_ADD_WWPN ) Port Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_CLUSTER_DISCOVERY ) Manual Managed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 382
[chars]. Explanation The svctask stopcluster IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_CREATE_FC_MAPPING ) Flash Copy mapping created [chars]. Explanation The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 383
IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_DELETE_WWPN ) Port deleted from a Host [chars]. Explanation The svctask rmhostport IBM CLI command has been - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 384
dumped [chars]. Explanation The svctask dumperrlog IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_ERRORLOG_FIX ) Error log entry marked fixed [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 385
[chars]. Explanation The svctask stopfcconsistgrp IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_HOST_DELETE ) Host deleted [chars]. Explanation The svctask rmhost - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 386
IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(3c). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_MDISK_GRP_DELETE ) Managed Disk Group deleted [chars]. Explanation The svctask rmmdiskgrp IBM CLI command has been - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 387
IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_MDISK_SET_NAME ) Managed Disk attributes modified [chars]. Explanation The svctask chmdisk IBM CLI command has been - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 388
the pending state. It will shortly go into the online or offline state. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_NODE_REMOVE ) Node leaving cluster (expected) [chars]. Explanation The node has - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 389
dec] SS_ERR_CFG_NODE_UNPEND ) Node Unpend [chars]. Explanation The node has gone online. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_PLANAR_SN_CHANGE ) Attempt to change the Planar Serial Number - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 390
chars]. Explanation The svctask rmconsistgrp IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_REMOTE_DELETEREL ) Remote Copy relationship deleted [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 391
has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_REMOTE_SWITCH ) Remote Copy relationship switched [chars]. Explanation The svctask switchrcrelationship IBM CLI command has been - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 392
and all nodes have been restored to the previous level of code. Recommended Action Perform problem determination on the cause of the upgrade failure and take corrective action before retrying the upgrade. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 393
[chars]. Explanation The svctask rmvdisk IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_VDISK_EXPAND ) Virtual Disk expanded [chars]. Explanation The svctask - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 394
[chars]. Explanation The svctask chvdisk -iogrp IBM CLI command has been invoked. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_VDISK_SET_NAME ) Virtual Disk name modified [chars]. Explanation The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 395
Action Enter the show environment fan CLI command or use an equivalent Fabric Manager/Device Manager procedure to determine fan operation and take action to cool down the switch. Introduced Cisco MDS SAN-OS Release 1.3(4a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-359 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 396
battery conditioning. Recommended Action Enter the clock set CLI command or use an equivalent Fabric Manager/Device Manager procedure to set the correct time. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SVC_BATTERY-SLOT#-2-COMMUNICATION_FAILURE: Communication failure with battery [dec - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 397
. Recommended Action Replace the battery. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(4a). SVC_BATTERY-SLOT#-4 Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 398
that belong to a different class of services. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 399
the problem persists, use the init system CLI command from the switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command. This command will initialize the switch, reset the entire internal disk, and reformat the bootflash: partition. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 400
problem persists, issue the init system CLI command from the switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command. This command will initialize the switch, reset the entire internal disk, and reformat the bootflash: partition. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 401
for this service. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 402
find the conversion library for this service. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 403
initial synchronization of the services was terminated. The synchronization will be attempted again later. Recommended Action Enter the reload module CLI command or use an equivalent Fabric Manager/Device Manager procedure to reset the standby supervisor. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 404
show system reset-reason CLI command or use the equivalent Fabric Manager/Device Manager procedure to find out what caused the switchover. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-IMPROPER_CLEANUP: Service "[chars]" exited without replying to swover request. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 405
reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-PARSEERR_DUP_UGRPENTRY: [chars]: service [chars] duplicated in the current upgrade group. Previous use - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 406
list of services. The initialization of the system cannot proceed further. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 407
list of services. The initialization of the system cannot proceed further. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 408
list of services. The initialization of the system cannot proceed further. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 409
you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-PARSEERR_INVALIDSTDBYDEPEND: [chars]: service [chars] cannot - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 410
If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-PARSEERR_REP_UGRPENTRY: [chars]: service [chars] is used - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 411
list of services. The initialization of the system cannot proceed further. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 412
for the fabric switch upgrade. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.1(1a). 2-376 Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 413
because service failed to respond to SIGKILL sent to it by system manager. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 414
the problem persists, Use the init system CLI command from the switch(boot)# prompt to initialize the configuration partition. Note:This is a disruptive command. This command will initialize the switch, reset the entire internal disk, and reformat the bootflash: partition. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 415
this message continues, contact your technical support representative. Introduced Cisco MDS SAN-OS Release 3.0(1). SYSMGR-3 Error CLI command or use a similar Fabric Manager/Device Manager procedure to find out what caused the switchover. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 416
process CLI command or use a similar Fabric Manager/Device Manager procedure to verify that the system is running properly and the service is behaving correctly. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-3-CFGWRITE_SRVTIMEOUT: Service [chars] failed to store its configuration - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 417
. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-3-FAILED_PFM_HANDSHAKE: PFM-handshake from service "[chars]" failed (error-id [hex]). Explanation The platform manager handshake has failed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 418
actions that belong to the platform manager service. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 419
The identity of a service is inconsistent in the image file. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 420
No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Manager in the specified timeout period. Explanation A required service has failed to send a response after receiving a request for the fabric switch upgrade. Recommended Action If you purchased Cisco support through a Cisco - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 421
and the high availability policies implemented for the service, the service might be restarted automatically. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-3-SHUTDOWN_OVER: The System Manager is shutting down now. Explanation The system - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 422
A spawned service could not handshake with the system manager and was terminated. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 423
Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-4-PARSEWARN_RESTART_CNT_TOO_BIG: Service "[chars]": [chars] restart count of [dec] too big, needs to be set to [dec]. Explanation This is an internal debug message. Recommended Action If you purchased Cisco support through a Cisco reseller - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 424
: Upgrade completed for all the groups. Explanation The system manager completed a full upgrade. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-5-ALL_SCOPES_STARTED: System services have completely started at this time. Explanation System - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 425
requested configuration erase has started. The error message shows the process ID of the process servicing the request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-5-CFGINIT_STARTED: Initialization of the startup configuration started - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 426
failed: [chars] (error-id [hex]). Explanation Handshake with a service failed because system manager could not send handshake response to it. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-390 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 427
Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(3). Error Message SYSMGR-5-ISSU_ABORT: Notifying services of aborted ISSU (PID - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 428
message shows the process ID of the process servicing the request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-5-RECOVERY_FAILED: Stateful recovery failed, system manager will now start stateless. Explanation Stateful recovery failed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 429
This happens during the nondisruptive fabric switch upgrade. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.1(1a). Error Message SYSMGR-5-SERVICE_DELETED: Service [chars] has been removed from the System Manager database. Explanation The service has been removed from - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 430
problem or malfunction. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-6-SERVICE_STARTED: Service "[chars]" started with PID([dec]). Explanation The system manager is starting a service - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 431
SYSMGR-7 Error Message SYSMGR-7-CFGWRITE_UNEXPECTEDRSP: Discarding unexpected response from service "[chars]". Explanation The system manager discarded an unexpected response from a service. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 432
this time from service "[chars]" ([chars]). Explanation Unexpected opcode. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-7-UNKNOWNMSG: Unknown opcode [dec] received from [chars]. Explanation The system manager - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 433
an error on module [dec]. Reason: [chars]. Explanation Compact flash test errors. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.3(1a). Error Message SYSTEMHEALTH-2-OHMS_BOOTFLASH_FAILED_RESET_DAY: Bootflash hard resets for module [dec] has reached threshold limit in - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 434
No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSTEMHEALTH-2-OHMS_EMGMT_FAILED: Management port failed for module [dec]. Explanation Ethernet management port failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 435
initializations failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.3(1a). Error Message SYSTEMHEALTH-2-OHMS_MOD_PORT_LB_TEST_FAILED: Module [dec] Port [dec] has failed loop back tests. Explanation Port loop-back test failure. Recommended Action No action is - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 436
request due to errors found [chars] test. Explanation System Health switch reload request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSTEMHEALTH-2-OHMS_SWITCHOVER_REQ: Supervisor switch over being requested due to errors found [chars] test - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 437
has been suspended due to internal errors. Explanation Battery test internal errors. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message SYSTEMHEALTH-4-OHMS_BATTERY_FAILING: Battery [dec] starting to fail on module [dec]. Reason: [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 438
has been suspended due to internal errors. Explanation Cache disk test internal errors. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message SYSTEMHEALTH-4-OHMS_CF_CRC_PASSED: Compact Flash firmware on module [dec] is healthy at this time. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 439
Health cache disk failing. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Deprecated Cisco MDS SAN-OS Release 1.3(4b). Error Message SYSTEMHEALTH-4-OHMS_EMGMT_ERRORS: Management port test cannot proceed due to internal errors on module [dec]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 440
[dec]. Explanation System Health Ethernet out-of-band channel failing. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Deprecated Cisco MDS SAN-OS Release 1.3(4b). Error Message SYSTEMHEALTH-4-OHMS_EXIT: Online System Health exiting due to internal errors - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 441
the inband test. Explanation Inband test has had too many errors while running. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSTEMHEALTH-4-OHMS_LC_DAEMON_EXITED: System Health process running on module [dec] exited due to internal errors. Will - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 442
has had too many errors while running. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message SYSTEMHEALTH-4-OHMS_SERDES_FAILED: Serdes loopback test on interface fc[dec]/[dec] failed. Explanation System Health SERDES test failure. Recommended Action No - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 443
errors module cf-crc-check. If the condition persists, schedule a downtime and replace the compact flash on the affected module. Introduced Cisco MDS SAN-OS Release 3.1(3). Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_RECALLED: Compact Flash on module [dec] is healthy at this time. But this has been - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 444
to errors. Explanation Online system health San Volume Controller (OHMS SVC) daemon exited. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message SYSTEMHEALTH-4-OHMS_TCAM_PARITY_ERRORS: TCAM test on module [dec] has been suspended due to internal errors - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 445
: Bootflash starting to fail on module [dec]. Explanation System Health bootflash failing. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4b). Error Message SYSTEMHEALTH-5-OHMS_CDISK_FAILING: Cache disk [dec] starting to fail on module [dec]. Explanation System - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 446
Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-5-OHMS_EMGMT_FAILING: Management port on module [dec] starting to show signs of failures. Explanation System Health Ethernet management failing. Recommended Action No - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 447
for TCAM on module [dec] have been cleared. Explanation System Health TCAM failures cleared. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.3(1a). Error Message SYSTEMHEALTH-5-OHMS_TEST_FAILING: [chars] test starting to fail on module [dec]. Explanation System Health - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 448
Message SYSTEMHEALTH-6-OHMS_EMGMT_CLEARED: Failing conditions for management port on module [dec] have been cleared. Explanation System Health Ethernet management port failure cleared. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message SYSTEMHEALTH - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 449
Message SYSTEMHEALTH-6-STARTED: Online Health Manager started. Explanation Online health manager started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 450
. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-414 Cisco MDS 9000 Family System Messages Reference OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 451
Terminal Access Controller Access Control System Plus (TACACS+) error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message TACACS-6-TACACS_ACCOUNTING_MESSAGE: [chars]. Explanation Accounting message. Recommended Action No action is required - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 452
allocate memory. Recommended Action Enter the show tcap event-history CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message TCAP-2-PROC_DN: Process is shutting down: [chars]. Explanation Terminal - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 453
where the failure occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message TLPORT-3-FC2ERROR: [chars]. Explanation TL port manager encountered a Fibre Channel Layer 2 (FC-2) error. The error message specifies the context where the error occurred - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 454
where the error occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). TLPORT-6 Error Message TLPORT-3-PSSERROR: [chars]. Explanation TL port manager encountered a persistent storage service (PSS) error. The error message specifies the context where the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 455
This is an informational message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message TLPORT-6-PORTUP: Translation Port [chars] UP. Explanation A port configured as a TL port is up and operational. The error message shows the Interface-ID string that - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 456
Error Message TTYD-2-TTYD_MTS: TTYD Message queue [dec] [chars]. Explanation Miscellaneous TTY daemon (TTYD) message problem. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message TTYD-2-TTYD_SDWRAP: TTYD Debug Facility error [dec] [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 457
-6 Error Message TTYD-3-TTYD_MISC_ERROR: Error [chars] with error [chars]([hex]). Explanation Miscellaneous TTY daemon (TTYD) problems. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message TTYD-6-TTYD_MISC: TTYD [chars]. Explanation The TTY daemon - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 458
at http://www.t10.org Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 1.3(4b). VEC-SLOT#-4 Error Message VEC-SLOT#-3-LOG_GUID_MISMATCH: GUID Mismatch DPP [dec] PWWN [chars] lun [chars] Expected [chars] Read [chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 459
(VEC) GUID ID finite state machine (FSM) that should not have occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release access to the virtual enclosure port (VEP) because of licensing. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 460
An event is received for a state in the virtual enclosure client (VEC) N port finite state machine (FSM) that should not have occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VEC-SLOT#-5-LOG_ERR_VEC_PID_FSM: Illegal Event [chars] in - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 461
is received for a state in the virtual enclosure client (VEC) virtual enclosure port (VEP) finite state machine (FSM) that should not have occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VEC-SLOT#-5-LOG_ERR_VEC_VEP_ILC_LIMIT: VEP [VSAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 462
client (VEC) VSAN XCHG finite state machine (FSM) that should not have occurred. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VEC-SLOT#-5-LOG_NOTICE_VEC_SLEEP_THRESH: VEC not scheduled for [dec] seconds. Explanation The virtual enclosure client - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 463
could not allocate memory. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). VEDB_MGR-6 Error Message VEDB_MGR - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 464
action is required. Introduced Cisco MDS SAN-OS Release 2.0(2b). Error Message VES-SLOT#-5-LOG_ERR_VES_PATH_FSM: disk guids dont match - received enclosure port (VEP) finite state machine (FSM) that should not have occurred. Recommended Action No action is required. Introduced Cisco MDS SAN- - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 465
the virtual Fibre Channel (VFC) messages. VFC-3 Error Message VFC-3-VFC_MEM_ERROR: Memory consistency problem. Explanation Miscellaneous target error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message VFC-3-VFC_TGT_ERROR: Target error:[chars] 0x%llx - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 466
process tried to add N port with its peer kernel driver. No SCSI discovery can be performed. Recommended Action Enter the show SCSI target internal driver CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 467
the show process cpu and show system internal sysmgr service all CLI commands or use a similar Fabric Manager/Device Manager procedure to collect more information. See the VSAN Manager system error codes for reason. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VHBAD-3-PSS_CREATE_FAIL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 468
storage service (PSS) reload runtime database failed because of the error shown in the error message. Recommended Action Enter the show flash CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes for reason. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 469
service (PSS) snapshot of runtime to URI failed because of the error shown in the error message. Recommended Action Enter the show flash CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes for the reason. Introduced Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 470
-OS Release 1.2(2a). Error Message VNI-6-STARTING: Virtual Network Interface Manager started. Explanation The service has successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-434 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 471
bytes. Explanation The virtual port manager could not allocate memory. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 472
virtual port manager (VPMON) daemon experienced a critical problem. Recommended Action No action is required. Introduced Cisco MDS SAN- Cisco MDS SAN-OS Release 2.1(1a). Error Message VPM-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars]. Explanation Could not send persistent storage service - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 473
purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VPM-3-UNKNOWN_MSG: Recvd. from Node=[dec] SAP=[dec]. Explanation The virtual port manager has received an unknown message from the node and service access point - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 474
2a). Error Message VPM-6-BECAME_STDBY: Became STANDBY from active mode. Explanation The virtual port manager became standby from active mode. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VPM-6-DG_DEREGISTERED: [chars]. Explanation The virtual - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 475
requests. The service was initialized in the mode shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VPM-6-SWITCHOVER: Switching Over to other Sup. Explanation The virtual port manager has successfully switched over to - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 476
and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VPM-6-VPMON_INFO: [chars]. Explanation A virtual port manager informational message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 477
Action Enter the show processes CLI command or use a similar Fabric Manager/Device Manager procedure to check the status of the other processes and debug the specified component. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-441 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 478
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] VRRP_CFG-5 Error Message VRRP_CFG-5-STARTING: VRRP Manager service started. Explanation The service successfully started. Recommended Action No action is required. - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 479
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] VRRP_CFG-6 Error Message VRRP_CFG-6-STARTING: VRRP Manager service started. Explanation The service successfully started. Recommended Action No action is required. - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 480
Cisco MDS SAN-OS Release 1.2(2a). VRRP_ENG-4 Error Message VRRP_ENG-3-INIT_FAILED: Initialization failed. Component [chars]. Explanation The service similar Fabric Manager/Device Manager procedure to check the status of the other processes and debug the specified component. Introduced Cisco MDS SAN - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 481
Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message VRRP_ENG-5-STARTING: VRRP Engine service started. Explanation The service successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). VRRP_ENG-6 Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 482
. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VRRP_ENG-6-STARTING: VRRP Engine service started. Explanation The service successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 483
Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VSAN-3-CFS_OPERATION_FAILED: cfs [chars] operation failed : [chars]. Explanation The Cisco Fabric Services (CFS) operation has failed. Recommended Action Check the reason for the failure of the CFS operation and rectify the problem - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 484
Message VSAN-6-CFS_MERGE_NOT_SUPPORTED: merging of fctimer configuration data is not supported. Explanation Merging of fctimer configuration data using CFS is not supported. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message VSAN-6-CREATED: Created - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 485
: Source URI:[chars] Destination URI:[chars] errcode:[dec]. Explanation Persistent storage service (PSS) snapshot error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). VSHD-3 Error Message VSHD-2-VSHD_SYSLOG_SDWRAP_ERR: Description:[chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 486
Persistent storage service (PSS) handling error. Introduced Cisco MDS SAN-OS switches in the fabric. Recommended Action Edit the configuration on one of the switches to obtain the desired role configuration database and then commit it. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-450 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 487
This is probably occurring due to different versions of system image on switches in the fabric. Recommended Action Make sure all switches are running the same version of the system image. Introduced Cisco MDS SAN-OS Release 2.0(1b). VSHD-5 Error Message VSHD-4-VSHD_ROLE_DISTRIBUTE_FAILURE: Role - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 488
as switch WWN, port WWN, and so on are still available. Recommended Action Add additional WWNs by programming a new secondary MAC address and its range. Introduced Cisco MDS SAN-OS Release 1.2(2a). WWN-2 Error Message WWN-1-TYPES2_5_ALERT: [dec] (< [dec] %) Remain. Explanation The WWN manager has - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 489
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-2-PSS_BKP_PSS_MISMATCH: Block [dec]: PSS: Not Free; BKPLN PROM: Free. Explanation This WWN manager detected a discrepancy between the - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 490
Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars]. Explanation Could not send persistent storage service Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-3-RELEASE_ERR: Cant Rel. WWN [chars]. Explanation WWN manager received - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 491
-Config. The description of error is [str.]. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release. Error Message WWN-3-TOOMANY_REQ_REL: WWNs [chars] = [dec] ] Explanation The WWN manager received a request to allocate a number of WWNs that is more than the maximum number - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 492
has been translated to the new format. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-4-TYPE1_WARN: [dec] (< [dec] %) Remain. Explanation The WWN manager has only the shown percent or less of WWNs remaining for allocation. Recommended Action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 493
2a). Error Message WWN-6-BECAME_STDBY: Became STANDBY from active mode. Explanation The WWN manager became standby from active mode. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-6-EXCESSIVE_DELAY: [chars]. Explanation Excessive time taken - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 494
entity. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-6-SERVICE_UP: Initialized [chars]. Explanation The WWN manager is up and ready to accept client requests for WWNs. The service was initialized in the mode shown in the error message - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 495
experienced an arbiter setup failure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message XBAR-5-ARB_INIT_PORT_FAIL: Arbiter reported failure to register port [dec] in group [dec] return_code [hex] ([chars]). Explanation The supervisor has experienced - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 496
the show xbar internal event-history command or use a similar Fabric Manager/Device manager procedure to collect more informations about the crossbar component. Power cycling the module may fix the problem. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message XBAR-5-XBAR_INIT_FAIL: Xbar [[dec - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 497
an xbar setup failure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message XBAR-5-XBAR_PORT_LPBACK_ENABLE_FAIL: Xbar [[dec].[dec]] reported failure to enable port loopback on [dec] return_code [hex] ([chars]). Explanation The supervisor has experienced - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 498
manual build fabric using fcdomain's interface if you would like to remove the unused virtual domain(s) from the fcdomain list. Introduced Cisco MDS similar Fabric Manager/Device manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-462 Cisco MDS 9000 Family - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 499
Enter the show xbar-client event-history command or use a similar Fabric Manager/Device manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 3.0(1). Error Message XBAR_CLIENT-2-PROC_INITFAIL: Process initialization failed due - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 500
in the system log. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-464 Cisco MDS 9000 Family System Messages Reference OL - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 501
The zone server cannot acquire change authorization. Recommended Action Verify the interoperability mode on all the switches or retry later. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-2-ZS_CHANGE_ACQUIRE_AUTH_FAILED: Acquire authorization failed on VSAN [dec]. Explanation The - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 502
server cannot activate because of reason shown in the error message on the domain. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-2-ZS_CHANGE_APPLY_FAILED: Apply changed failed on VSAN [dec]. Explanation The zone server cannot apply changes - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 503
Explanation The zone server cannot stage the zone configuration. Recommended Action Verify the interoperability mode on all the switches. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-2-ZS_CHANGE_SFC_REJECTED: SFC received from remote domain [dec] is rejected. Explanation Received - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 504
failed : [chars]. Explanation The zone server Fibre Channel Layer 2 (FC-2) operation failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Deprecated Cisco MDS SAN-OS Release 3.0(1). 2-468 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 505
and read-only attribute and reactivating active zone sets on all affected VSANs. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-2-ZS_LIC_FAILURE: License [chars] operation failed for license [chars]. Explanation License operation failed - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 506
. Recommended Action Compare the active zone set with the adjacent switch by entering the zone merge interface CLI command or by using a similar Fabric Manager/Device Manager procedure. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-470 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 507
interoperability mode to the same value on both switches. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message ZONE-2-ZS_MTS_OPER_FAILED: MTS [chars] operation failed : [chars]. Explanation The zone server messaging and transaction service (MTS) operation failed. Recommended Action No action - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 508
[chars], got [chars]). Explanation Configuration version mismatch. persistent storage service (PSS) URL expected the shown version, but the stored version is different. Recommended Action Upgrade or downgrade to the expected version. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 509
Switched to soft zoning. Hard zoning was disabled due to a TCAM programming failure. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message ZONE-2-ZS_VIRTUAL_DOMAIN_INCONSISTENT: IVR reporting virtual domain different from rib and domain manager - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 510
failed because QoS was not enabled. Recommended Action Make sure QoS is enabled and reactivate the zone set in the VSAN. Introduced Cisco MDS SAN-OS Release 2.0(1b). ZONE-4 Error Message ZONE-4-LZ_OTHER_CMD_TO_ZONED_OUT_LUN: FCP command [hex] received from SID=[chars] to DID=[chars] for LUN=[chars - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 511
error: [chars] in vsan [dec]. Explanation Unable to retrieve information about a domain from Domain Manager. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message ZONE-4-ZS_LC_UPGRADE_CHANGE_IN_PROGRESS: Linecard upgrade request is received when change - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 512
FC ID, FWWN) when interoperability mode is turned on for the VSAN. Recommended Action Turn off interoperability mode or make sure that active zone set has only interoperable members (pWWN). Introduced Cisco MDS only supported members in the current interoperability mode. Introduced Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 513
failed to send heartbeat to system manager: Reason=[chars]. Explanation The LUN read-only zoning process cannot send a heartbeat to the system manager. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 514
has received a request sense fcp command from source ID to destination ID for the LUN. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-6-LZ_SERVICE_UP: LUN/Read-only Zoning Process initialized [chars]. Explanation The LUN read-only zoning - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 515
the domain list does not match or authorization has already been acquired by another switch. Recommended Action Verify the interoperability mode on the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ZONE-6-ZS_FC2_OPER_INFO: FC2 [chars] operation failed : [chars]. Explanation - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 516
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] 2-480 Cisco MDS 9000 Family System Messages Reference OL-15956-01 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 517
Send documentation comments to [email protected] A A P P E N D I X OHMS_BOOTFLASH_ERRORS Revised: November, 2007 OL-15956-01 DISK FAILURE ) failed. OD_DISK_IOCTL_GET_STATE2_FAILED Ioctl(CHECKPOWERMODE2) failed. OL-15956-01 Cisco MDS 9000 Family System Messages Reference A-1 - HP AJ732A | Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 518
Appendix A OHMS_BOOTFLASH_ERRORS Send documentation comments to [email protected] Table A-1 OHMS_BOOTFLASH_ERRORS Description (continued) Reason Code . OD_DISK_NOR_REFLASH_FAILED Disk firmware update procedures failed. Cisco MDS 9000 Family System Messages Reference A-2 OL-15956-01
Send documentation comments to [email protected]
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco MDS 9000 Family System Messages
Reference
Cisco MDS 9000 SAN-OS Release 3.3(1a)
April 2008
Text Part Number: 0L-15956-01