HP AJ732A Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April - Page 436
Cisco MDS SAN-OS Release 3.13., Check the compact flash on the board and any relevant system
UPC - 883585789481
View all HP AJ732A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 436 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSTEMHEALTH-2-OHMS_SUP_CF_REFLASH_FAILED: Compact Flash firmware refresh procedure failed, replace the compact flash on module [dec]. Reason: [char]. Explanation Compact Flash firmware corrupted. Recommended Action Schedule a downtime and replace the compact flash on the affected module. Introduced Cisco MDS SAN-OS Release 3.1(3). Error Message SYSTEMHEALTH-2-OHMS_SUP_CF_CRC_INIT_ERRORS: Compact Flash firmware CRC checksum procedure encountered an error during initialization on module [dec]. Reason: [chars]. Explanation Compact flash CRC checksum initializations failed. Recommended Action Check the compact flash on the board and any relevant system (mis)configurations. Introduced Cisco MDS SAN-OS Release 3.3(1a). Error Message SYSTEMHEALTH-2-OHMS_SWITCH_RELOAD_REQ: Switch reload request due to errors found [chars] test. Explanation System Health switch reload request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSTEMHEALTH-2-OHMS_SWITCHOVER_REQ: Supervisor switch over being requested due to errors found [chars] test. Explanation System Health switchover request. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSTEMHEALTH-2-OHMS_TCAM_PARITY_FAILED: TCAM test failed for module [dec]. Explanation TCAM test failed for module as uncorrectable parity errors detected. Recommended Action Schedule a downtime and replace the compact flash on the affected module. Introduced Cisco MDS SAN-OS Release 3.3(1a). 2-400 Cisco MDS 9000 Family System Messages Reference OL-15956-01