HP AP775A Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-1 - Page 188

private-vlan Chapter 2 Ethernet Commands Send comments to [email protected] A community VLAN is defined as the VLAN that carries the traffic among community ports and from community ports to the promiscuous ports on the corresponding primary VLAN. A primary VLAN is defined as the VLAN that is used to convey the traffic from the routers to customer end stations on private ports. Multiple community and isolated VLANs are allowed. If you enter a range of primary VLANs, the system uses the first number in the range for the association. Note A PVLAN isolated port on a Cisco Nexus 5000 Series switch running the current release of Cisco NX-OS does not support IEEE 802.1q encapsulation and cannot be used as a trunk port. Examples This example shows how to assign VLAN 5 to a private VLAN as the primary VLAN: switch# configure terminal switch(config)# vlan 5 switch(config-vlan)# private-vlan primary This example shows how to assign VLAN 100 to a private VLAN as a community VLAN: switch(config-vlan)# exit switch(config)# vlan 100 switch(config-vlan)# private-vlan community This example shows how to assign VLAN 109 to a private VLAN as an insolated VLAN: switch(config-vlan)# exit switch(config)# vlan 109 switch(config-vlan)# private-vlan isolated Related Commands Command Description feature private-vlan Enables private VLANs. show vlan Displays information about VLANs. show vlan private-vlan Displays information about private VLANs. 2-40 Cisco Nexus 5000 Series Command Reference OL-16599-01