HP AiO400t HP StorageWorks All-in-One Storage System User Guide (440583-005, F - Page 30
Configuring the server on the network, Before you begin
View all HP AiO400t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3. Using the methods described in the HP Integrated Lights-Out 2 User Guide, connect to the iLO 2 port. NOTE: To find the default iLO 2 log on settings, see the iLO 2 Default Network Settings card attached to your server. The default DNS, administrator name, and password needed to log on will be on this card. 4. If desired, you can change the default user name and password on the administrator account to your predefined selections. 5. Set up your user accounts, if using the local accounts feature. 6. Activate iLO 2 advanced features by entering a license key from the included HP ProLiant Essentials Integrated Lights-Out 2 Advanced Pack. 7. Access the HP All-in-One Storage System using the iLO 2 Remote Console functionality. Log on to the HP All-in-One Storage System with the default user name administrator and the password hpinvent. The All-in-One Management Console starts automatically. NOTE: When the Remote Console feature is enabled, you can get access to the storage system's login screen. The Integrated Lights-Out 2 port comes with factory default settings, which the administrator can change. Administrators may want to add users, change SNMP trap destinations, or change networking settings. See the HP Integrated Lights-Out 2 User Guide for information about changing these settings. To obtain this guide, go to http://www.hp.com/support/manuals, navigate to the servers section, and select Server management. In the ProLiant Essentials Software section, select HP Integrated Lights-Out 2 (iLO 2) Standard Firmware. Configuring the server on the network Before you begin When first powering on the storage system you need to have some configuration data readily available to complete the Running the Rapid Startup Wizard. Complete the Server configuration steps and use the data collected to initialize the storage system. NOTE: Ensure you are logged onto the HP All-in-One Storage System as a local or domain administrator. Table 5 Server configuration steps Configuration Steps Administrative Identity 30 Installing and configuring the server