HP BL260c Electrical signal integrity considerations for HP BladeSystem - Page 14
of a board for more than two inches of cumulative distance. The length of trace segments that are
UPC - 883585668663
View all HP BL260c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
of a board for more than two inches of cumulative distance. The length of trace segments that are parallel to the edge of a board should be minimized as much as possible. Traces should be at an angle of at least 10º to a board edge. This is to reduce the effects of PCB fiber weave on board impedance and propagation velocity on differential traces (see Figure 13). Figure 13. Zig-Zag routing example 14
of a board for more than two inches of cumulative distance. The length of trace segments that are
parallel to the edge of a board should be minimized as much as possible. Traces should be at an
angle of at least 10ยบ to a board edge. This is to reduce the effects of PCB fiber weave on board
impedance and propagation velocity on differential traces (see Figure 13).
Figure 13.
Zig-Zag routing example
14