HP BL680c ProLiant BL680c Generation 5 Server Blade Installation Instructions - Page 3
Completing the configuration
UPC - 884420396314
View all HP BL680c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
4. Push the device bay shelf back until it stops, lift the right side slightly to disengage the two tabs from the divider wall, and then rotate the right edge downward (clockwise). 7. Prepare the server blade for installation. 5. Lift the left side of the device bay shelf to disengage the three tabs from the divider wall, and then remove it from the enclosure. 8. Install the server blade. 6. Remove the connector covers. CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the enclosure unless all hard drive and device bays are populated with either a component or a blank. 9. Install blanks in any empty bays. For more information, see the enclosure setup and installation guide. Completing the configuration To complete the server blade and HP BladeSystem configuration, see the overview card that ships with the enclosure and also see the server blade user guide.