HP CC395A User Manual - Page 53
Table 2-14, Device Behavior menu continued
View all HP CC395A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Table 2-14 Device Behavior menu (continued) Menu item Sub-menu item Sub-menu item [output device menu] NOTE: This menu varies depending on the output device installed. General Copy Behavior Hold Off Print Job Hold Off Time Scan Ahead Auto Print Interrupt Copy Interrupt Alternative Letterhead Mode Values Description Use this menu to set the finishing options for the installed output device. On Off Enabled (default) Disabled Enabled Disabled (Default) Enabled Disabled (Default) Off (default) On Prevents print jobs from beginning to print while a walk-up user is setting up a job. Prevents non-copy print jobs from starting for a specified time after a copy job is completely printed. Use this feature to turn on no-wait scanning. With Scan Ahead enabled, the pages in the original document are scanned to disk and held until the device becomes available. When this feature is enabled, copy jobs can interrupt print jobs that are set to print multiple copies. The copy job is inserted into the print queue at the end of one copy of the print job. After the copy job is complete, the device continues printing the remaining copies of the print job. When this feature is enabled, a copy job that is currently printing can be interrupted when a new copy job is started. You are prompted to confirm that you want to interrupt the current job. Enable this feature to load letterhead or preprinted paper into the tray the same way for all copy jobs, whether you are copying to one side of the sheet or to both sides of the sheet. When this option is selected, load the paper as you would for printing on both sides. The device speed slows to the speed required for printing on both sides. ENWW Use the Administration menu 39