HP CM6030 Service Manual - Page 606
Transparencies or glossy paper will not feed, Envelopes jam or will not feed in the product
UPC - 883585780983
View all HP CM6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 606 highlights
Transparencies or glossy paper will not feed Transparencies or glossy paper will not feed Cause Solution The correct paper type is not specified in the software or printer Verify that the correct paper type is selected in the software or driver. printer driver. The input tray is overfilled. Remove excess paper from the input tray. Do not load more than 200 sheets of glossy paper or glossy film, or more than 100 transparencies in Tray 2, 3, 4, or 5. Do not exceed the maximum stack height marks for Tray 1. Paper in another input tray is the same size as the transparencies, and the product is defaulting to the other tray. Make sure that the input tray containing the transparencies or glossy paper is selected in the software program or printer driver. Use the product control panel to configure the tray to the paper type loaded. The tray containing the transparencies or glossy paper is not configured correctly for type. Make sure that the input tray containing the transparencies or glossy paper is selected in the software program or printer driver. Use the product control panel to configure the tray to the paper type loaded. Transparencies or glossy paper might not meet supported paper specifications. High-humidity environments may cause glossy paper not to feed, or to feed too many sheets. Use only paper that meets the HP paper specifications for this product. Print glossy paper from Tray 2, 3, 4, or 5 for best results. Avoid printing glossy paper in high humidity conditions. When printing glossy paper, removing the paper from the wrapper and letting it rest for a few hours can improve feeding into the product. However, letting paper rest in humid environments may also cause blisters. CAUTION: HP Color Laser Presentation Paper, Glossy (Q2546A) is not supported with this product. Using this type of paper can cause a fuser jam that might require the replacement of the fuser. Two recommended alternatives are HP Color LaserJet Presentation Paper, Soft Gloss (Q6541A) and HP Color LaserJet Brochure Paper, Glossy (Q6611A, Q6610A). For a list of supported paper types, see Supported paper types on page 66. Envelopes jam or will not feed in the product Envelopes jam or will not feed in the product Cause Solution Envelopes are loaded in an unsupported tray. Only Tray 1 can Load envelopes into Tray 1. feed envelopes. Envelopes are curled or damaged. Try using different envelopes. Store envelopes in a controlled environment. Envelopes are sealing because the moisture content is too high. Try using different envelopes. Store envelopes in a controlled environment. Envelope orientation is incorrect. Verify that the envelope is loaded correctly. This product does not support the envelopes being used. Tray 1 is configured for a size other than envelopes. Refer to the HP LaserJet Printer Family Print Media Guide. Configure Tray 1 size for envelopes. 560 Chapter 7 Solve problems ENWW