HP Chromebook 11MK G9 Education Edition Maintenance and Service Guide - Page 45
System board, Remove the Phillips M2.0 × 3.5 screw
View all HP Chromebook 11MK G9 Education Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Remove the sensor board: 1. Detach the clear shield (1) that covers the sensor board cable ZIF connector on the system board. 2. Release the ZIF connector (2) to which the sensor board cable is connected, and then disconnect the sensor board cable from the system board. 3. Detach the sensor board cable (3) from the computer. (The sensor board cable is attached to the computer with double-sided adhesive.) 4. Remove the Phillips M2.0 × 3.5 screw (4) that secures the sensor board to the computer. 5. Remove the sensor board (5). Reverse this procedure to install the sensor board. System board To remove the system board, use these procedures and illustrations. Table 5-6 System board descriptions and part numbers Description Spare part number System board (includes integrated Mediatek Arm Cortex-A MT8183 2.00 GHz integrated processor (8 core), a graphics subsystem with UMA memory, replacement thermal material, and the Chrome operating system): Equipped with 8 GB of system memory and 64 GB of eMMC system storage M44239-001 Equipped with 4 GB of system memory and 64 GB of eMMC system storage M44237-001 Equipped with 8 GB of system memory and 32 GB of eMMC system storage M44238-001 Equipped with 4 GB of system memory and 32 GB of eMMC system storage M44236-001 Before removing the system board, follow these steps: ENWW Component replacement procedures 37