HP Cisco MDS 8/12c HP StorageWorks C-series Fabric Switches for NX-OS 5.0(4b) - Page 21
C-series Mds 9134 Fabric Switch
View all HP Cisco MDS 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3. Click Cross operating system (BIOS, Firmware, Diagnostics, etc.). 4. In the Description column, select the appropriate mezzanine update utility - c-class Mezz Card Update for Cisco MDS 8Gb Fabric Switch for HP BladeSystem c-Class Note: For additional switch support information, refer to the C-series FC Switch Connectivity Stream on SPOCK. How to acquire a port license on the Cisco MDS 8Gb Fabric Switch for HP BladeSystem cClass 1. Log into the switch using either the management console or telnet 2. Enter your network-admin privileged account by entering your login name and password switch login: admin Password: 3. Enter the following command to verify which ports are eligible to receive a license: switch# show port-license 4. Enter into the configuration mode by entering the following command: switch# config terminal 5. Enter the following commands to enable a port license: In this example, bay2 acquires a port license. switch(config)# interface bay2 switch(config-if)# shut switch(config-if)# port-license acquire switch(config-if)# no shut switch(config-if)# exit switch(config)# exit 6. Enter the following command to verify the desired port acquires a license: switch# show port-license 7. Copy the running configuration into the startup configuration by entering the following: switch# copy running-config startup-config Note: The running configuration overwrites the startup configuration. C-SERIES MDS 9134 FABRIC SWITCH The MDS 9134 switch has a base 34-port chassis to accommodate up to 32 full rate 4-Gbps and 2 10-Gbps fibre channel ports. Four configurations are available: 24 4-Gbps active ports with optional 8-port 4-Gbps and 2-port 10-Gbps on demand port activation licenses 21 MDS 9000 Series Multilayer Director & Multilayer Fabric Switches Release Notes