HP Cisco MDS 9120 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rele - Page 49

Caveats Send documentation comments to [email protected] Resolved Caveats • CSCsu80534 Symptom: An MDS 9124 switch, MDS 9134 switch, MDS 9222i switch, Cisco Fabric Switch for IBM BladeCenter, or Cisco Fabric Switch for HP c-Class BladeSystem, may reboot with reason Unknown or Watchdog Timeout when the switch has been up for 497 days. The following messages may be displayed: switch#show system reset-reason --- reset reason for Supervisor-module 1 (from Supervisor in slot 1) --1) No time Reason: Unknown Service: Version: 3.1(2) or, switch#show system reset-reason` ----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) --1) At 203437 usecs after Fri Jul 4 18:32:02 2008 Reason: Watchdog Timeout Service: Version: 3.1(2) Issuing the show logging onboard command will contain a Card Uptime Record with an uptime of 497 days. the following message may be displayed: Thu Sep 25 19:09:33 2008: Card Uptime Record Uptime: 42946218, 497 days 1 hour(s) 30 minute(s) 18 second(s) Reset Reason: Unknown (0) Card Mode Runtime Workaround: This issue is resolved. • CSCsg49151 Symptom: If you bring up more than one link at a time between two VSANs that have overlapping domains and at least one of the switches is SDV enabled, one link will become isolated. The other links will come up, even though the domains are overlapping. In addition, the SDV virtual domains will change, causing traffic disruption on all devices associated with their old value. Workaround: This issue is resolved. • CSCsl71227 Symptom: Using Fabric Manager Release 3.2(2), if you have an enclosure with multiple ports and you then use the Data Migration Wizard to create a job with that enclosure as the existing storage but don't select all the storage ports in the enclosure, an error is displayed in the creation wizard. Workaround: This issue is resolved. • CSCso28570 Symptom: On the MDS 9222i module, an upgrade from SAN-OS Release 3.2(x) to Release 3.3(1a) fails when there is an active FC-Redirect configuration (created by Cisco SME or Cisco DMM applications) on the switch. An active FC-Redirect configuration is defined as: - FC-Redirect configuration for hosts or target connected locally - FC-Redirect configuration created by an application running on that switch. If an upgrade is attempted when such active configuration is present, the switch will go into a disruptive upgrade. Workaround: This issue is resolved. OL-17675-02 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b) 49