HP Cisco MDS 9120 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rele - Page 61
This issue occurs in Fabric Manager and Device Manager Release 3.2x, Release 3.3x, Release
View all HP Cisco MDS 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Caveats Send documentation comments to [email protected] • CSCsk35725 Symptom: Fabric Manager takes 2 to 3 minutes to bring up the DMM job creation wizard in a setup with 25 switches, 400 enclosures, and 2400 entries in the name server. Workaround: None. • CSCsk49309 Symptom: IPv6 duplicate address detection (DAD) may not always works for the management port. Workaround: None. • CSCsm47252 Symptom: DMM jobs move to the Reset state and the following reason is displayed: Peer connection failure. In a Cisco DMM dual-fabric topology, the Storage Service Module (SSMs) in the two fabrics communicate with each other over IP by establishing a TCP connection. This connection is routed IP over FC to the local Supervisor and from the Supervisor it is switched over the IP mgmt interface. As a result, if there is a Supervisor switchover, the TCP connection may or may not survive the switchover. In the event that the TCP connection cannot be re-established in time, the DMM jobs in that SMM will move to the Reset state. Workaround: None. • CSCsq20408 Symptom: The show startup command displays aspects of the running configuration when SANtap is configured and/or SANtap objects are created. When a user creates objects such as a CVT or DVT, the configuration is showing in the running-configuration and in the startup-configuration without copying the configuration into the startup-configuration. Workaround: Issue a copy running-config startup-config command whenever you create objects such as a CVT or DVT so that the running-configuration and startup-configuration are synchronized. • CSCsr69166 Symptom: Solaris Windows Manager does not resize windows correctly which effects some Device Manager screens. Workaround: Download and install the 119538-1 patch from Sun Microsystems. The patch (119538-17 GNONE 2.6.0: Windows Manager Patch, Generic, 2008/08/08) can be obtained from sunsolve.sun.com. • CSCsu30034 Symptom: During and In Service Software Upgrade (ISSU), throughput statistics will not be available from the switch undergoing an upgrade. This information will be not able available from the CLI or Device Manager via SNMP. Workaround: After the upgrade is complete, the statistics will become available. • CSCsu39975 Symptom: Device Manager does not install and the system displays this error: [ERROR] no !/ in spec This issue occurs in Fabric Manager and Device Manager Release 3.2(x), Release 3.3(x), Release 3.4(x), and Release 4.1(x). Workaround: Uninstall JRE 1.5_16 and install any other JRE 1.5 update if you intend to use Device Manage Release 3.2(x). Use JRE 1.6 with Device Manager Release 3.3(x), Release 3.4(x) and Release 4.1(x). OL-17675-02 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b) 61