HP Cisco MDS 9124 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Rel - Page 30

Caveats Send documentation comments to [email protected]. Open Caveats • CSCei82909 Symptom: The implementation of the Internet Key Exchange (IKE) version 2 in Cisco MDS 9000 switches may not be interoperable with other IKE version 2 implementations. The Cisco MDS 9000 IKE version 2 implementation is used whenever an encrypted FCIP tunnel is established between two MDS switches. Workaround: If a Cisco MDS 9000 switch tries to establish an IKE version 2 tunnel with a non-MDS switch running IKE version 2, or vice versa, the gateway or the Cisco MDS 9000 switch should be configured to use IKE version 1 for that tunnel. • CSCsh31236 Symptom: On a Cisco MDS 9513 Switch, when there are more than 512 ports on a single chassis, some ports with indexes between 0x200 and 0x20f may not come up. In addition, some ports with indexes between 0x0 and 0xf may show unexpected behavior when the ports with indexes between 0x200 and 0x20f are brought up. To display the port indexes, issue the show system internal fcfwd idxmap port-to-interface command. The port indexes appear in the column with the heading "glob idx." Workaround: Do not bring up more than 512 ports. To ensure that the port indexes between 0x0 and 0xf behave correctly, follow these steps: 1. Issue the shut command for ports with indexes 0x200 to 0x20f. 2. Issue the shut command for the ports with indexes 0x0 to 0xf, followed by the no shut command for the same port indexes. CSCin95789 Symptom: When you configure Cisco Traffic Analyzer to capture traffic on one or more interfaces on a Windows platform, the configuration web page might not show that the interface has been selected for traffic capture even though traffic capture on that interface is enabled. Workaround: Check the logs to clarify that the correct interface has been selected. • CSCsd21187 Symptom: If an iSNS client tries to register a portal separately after registering the network entity and storage node object with the Cisco MDS iSNS server, the portal registration might fail. Workaround: Register the portal at the same time as the network entity and storage node object registration. • CSCse31881 Symptom: If there are IP over Fibre Channel (IPFC) interfaces configured on an SSM, you might experience issues if you downgrade from SAN-OS Release 3.x to Release 2.x. Workaround: Before downgrading, remove the IPFC interface on the module and then recreate the IPFC interface after the downgrade is complete. • CSCsg19148 Symptom: Time zone changes that are executed on an MDS switch do not take effect on the 12-port, 24-port, and 48 port 1-Gbps/2-Gbps/4-Gbps Fibre Channel modules, and on the 4-port 10-Gbps module. This issue occurs in SAN-OS Releases 3.0(1), 3.0(2), 3.0(2a), and 3.0(3). Time zone changes that are executed on an MDS switch do not take effect on the 16-port or 32-port 1-Gbps/2-Gbps module, on the 4-port or 8-port Gigabit Ethernet IP services module, the MPS 14/2 module, and on the SSM. This issue occurs in SAN-OS Release 3.0(3). Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3a) 30 OL-12208-06