HP Cisco MDS 9124 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1001

Chapter 46 Configuring Port Security Port Security Configuration Distribution Send documentation comments to [email protected] Figure 46-9 Create Port Security Dialog Box Step 4 Step 5 Step 6 Step 7 Double-click the device from the available list for which you want to create the port security setting. Double-click the port from the available list to which you want to bind the device. Click Create to create the port security setting. Click the Apply Changes icon to save these changes. Deleting Port Security Setting To delete a port security setting from the configured database on a switch, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Expand a VSAN and select Port Security in the Logical Domains pane. Click the Config Database tab. You see the configured port security settings for that VSAN. Click the row you want to delete. Click Delete Row. You see the confirmation dialog box. Click Yes to delete the row, or click No to close the confirmation dialog box without deleting the row. Click the Apply Changes icon to save these changes. Port Security Configuration Distribution The port security feature uses the Cisco Fabric Services (CFS) infrastructure to enable efficient database management, provide a single point of configuration for the entire fabric in the VSAN, and enforce the port security policies throughout the fabric (see Chapter 13, "Using the CFS Infrastructure"). OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 46-17