HP Cisco MDS 9124 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 903

Chapter 43 Configuring Certificate Authorities and Digital Certificates Configuring CAs and Digital Certificates Send documentation comments to [email protected] Figure 43-1 PKI RSA Key-Pair Information Step 3 Click Create Row. You see the Create RSA Key-Pair dialog box shown in Figure 43-2. Figure 43-2 Create RSA Key-Pair Dialog Box Step 4 Step 5 Step 6 Select the switches for which you want to create the RSA key-pair. Assign a name to the RSA key-pair. Select the Size or modulus values. Valid modulus values are 512, 768, 1024, 1536, and 2048. Note The security policy (or requirement) at the local site (MDS switch) and at the CA (where enrollment is planned) are considered in deciding the appropriate key modulus. Note The maximum number of key-pairs you can configure on a switch is 16. Step 7 Check the Exportable check box if you want the key to be exportable. Caution The exportability of a key-pair cannot be changed after key-pair generation. Note Only exportable key-pairs can be exported in PKCS#12 format. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 43-7