HP Cisco MDS 9134 Cisco MDS 9000 Family CLI Configuration Guide, Release 3.x ( - Page 1217

Chapter 51 Configuring RMON RMON Verification Send documentation comments to [email protected] RMON Event Configuration To enable RMON events, follow these steps: Step 1 Step 2 Command switch# config t switch(config)# rmon event 2 log trap eventtrap description CriticalErrors owner Test2 switch(config)# no rmon event 5 Purpose Enters configuration mode. Creates RMON event number 2 to define CriticalErrors and generates a log entry when the event is triggered by the alarm. The user Test2 owns the row that is created in the event table by this command. This example also generates an SNMP trap when the event is triggered. Deletes an entry from the RMON event table. RMON Verification Use the show rmon and show snmp commands to display configured RMON and SNMP information (see Example 51-1 and 51-3). Example 51-1 Displays Configured RMON Alarms switch# show rmon alarms Alarm 1 is active, owned by admin Monitors 1.3.6.1.2.1.2.2.1.16.16777216 every 1 second(s) Taking delta samples, last value was 0 Rising threshold is 1, assigned to event 0 Falling threshold is 0, assigned to event 0 On startup enable rising or falling alarm Example 51-2 Displays Configured RMON High Capacity Alarms switch# show rmon hcalarms High Capacity Alarm 10 is active, owned by Testuser Monitors 1.3.6.1.2.1.31.1.1.1.6.16785408 every 300 second(s) Taking absolute samples, last value was 0 (valuePositive) Rising threshold low is 4294967295 & high is 15 (valuePositive) Rising threshold assigned to event 1 Falling threshold low is 0 & high is 0 (valueNotAvailable) Falling threshold assigned to event 0 On startup enable rising alarm Number of Failed Attempts is 0 Note High capacity RMON alarms can be configured using the CISCO-HC-ALARM-MIB. See the Cisco MDS 9000 Family MIB Quick Reference. Example 51-3 Displays Configured RMON Events switch# show rmon events Event 2 is active, owned by Test2 Description is CriticalErrors Event firing causes log and trap to community eventtrap, last fired 0 OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 51-3