HP Cisco MDS 9134 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1353

Chapter 66 Troubleshooting Your Fabric Locating Other Switches Send documentation comments to [email protected] To locate switches that are not included in the currently discovered fabric using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Choose File > Locate Switches and Devices. You see the Locate Switches dialog box. In the Comma Separated Subnets field, enter a range of specific addresses belonging to a specific subnet to limit the research for the switches. To look for a Cisco MDS 9000 switch belonging to subnet 192.168.199.0, use the following string: 192.168.100.[1-254] Multiple ranges can be specified, separated by commas. For example, to look for all the devices in the two subnets 192.168.199.0 and 192.169.100.0, use the following string: 192.168.100.[1-254], 192.169.100.[1-254] Enter the appropriate read community string in the Read Community field. The default value for this string is public. Click Display Cisco MDS 9000 Only to display only the Cisco MDS 9000 Family switches in your network fabric. Click Search to discover switches and devices in your network fabric. You see the results of the discovery in the Locate Switches window. (See Figure 66-10.) Figure 66-10 Search Results for Switches and Devices Note The number in the lower left corner of the screen increments as the device locator attempts to discover the devices in your network fabric. When the discovery process is complete, the number indicates the number of rows displayed. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 66-13