HP Cisco MDS 9134 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 607

Chapter 28 Creating Dynamic VSANs DPVM Send documentation comments to [email protected] Figure 28-1 DPVM Wizard Icon Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 You see the Select Master Switch page. Click the switch you want to be the master switch. This switch controls the distribution of the DPVM database to other switches in the fabric. Click Next. You see the AutoLearn Current End Devices page. (Optional) Click the Create Configuration From Currently Logged In End Devices check box if you want to turn on autolearning. Click Next. You see the Edit and Activate Configuration page. Verify the current or autolearned configuration. Optionally, click Insert to add more entries into the DPVM config database. Click Finish to update the DPVM config database, distribute the changes using CFS, and activate the database, or click Cancel to exit the DPVM Setup Wizard without saving changes. Figure 28-2 DPVM Setup Wizard: Select Master Switch Step 8 Step 9 Select the switch you want to be the master switch. This switch controls the distribution of the DPVM database to other switches in the fabric. Click Next. You see the AutoLearn Current End Devices page as shown in Figure 28-3. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 28-3