HP Cisco MDS 9216 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 842

port-security enable Chapter 18 P Commands Send documentation comments to [email protected] port-security enable To enable port security, use the port-security enable command in configuration mode. To disable port security, use the no form of the command. port-security enable no port-security enable Syntax Description This command has no other arguments or keywords. Defaults Disabled. Command Modes Configuration mode. Command History Release 2.0(x) Modification This command was introduced. Usage Guidelines Issuing the port-security enable command enables the other commands used to configure port security. Examples The following example shows how to enable port security. switch# config terminal switch(config)# port-security enable The following example shows how to disable port security. switch# config terminal switch(config)# no port-security enable Related Commands Command show port-security Description Displays port security information. 18-24 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x