HP Cisco MDS 9216 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 199
fabric-membership
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Appendix A Cisco SME CLI Commands fabric-membership Send documentation comments to [email protected] fabric-membership To add a node to a fabric, use the fabric-membership command. To remove the node from the fabric, use the no form of the command. fabric-membership fabric name no fabric-membership fabric name Syntax Description fabric name Specifies the fabric name. The maximum length is 32 characters. Defaults None. Command Modes Cisco SME cluster node configuration submode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines Use the fabric-membership command to put a node in a fabric. This command has to be configured before the interface sme slot/port [force] command can be accepted. The command cannot be removed if the interface sme slot/port [force] command is enabled. Examples The following example specifies a fabric to which the node belongs: switch# config t switch(config)# sme cluster clustername1 switch(config-sme-cl)# node local switch(config-sme-cl-node)# fabric-membership f1 Related Commands Command interface sme show interface sme shutdown Description Configures the Cisco SME interface to a cluster. Displays interface information. Enables or disables an interface. OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide A-11