HP Cisco MDS 9216 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 45
Adding a Fabric and Changing the Fabric Name, Admin, Con
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 2 Getting Started Before You Begin Send documentation comments to [email protected] Note To configure Cisco SME in a dual fabric environment, all the switches in the cluster should have the same credentials for SME user. Cisco SME requires the HTTPS protocol on the Cisco MDS 9000 switch with an MSM-18/4 module installed. You must enable HTTPS during the Fabric Manager installation. To enable HTTPS, refer to the installation information in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Adding a Fabric and Changing the Fabric Name You need to add the fabric that includes the Cisco MDS switch with the MSM-18/4 module installed. Or you also can add a fabric that includes an MDS 9222i switch. Note Cisco MDS SAN-OS Release 3.2(2c) or later, or Cisco NX-OS 4.x supports one cluster per switch. You will want to consider this during your planning. To add a fabric using Fabric Manager Web Server, follow these steps: Step 1 Step 2 Step 3 Step 4 Log in to Fabric Manager Web Client. Click the Admin tab. Click Configure. Click Add. The Add Fabric seed switch screen displays fields to log in to the fabric seed switch. OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide 2-13