HP Cisco MDS 9216 Cisco MDS 9100 Series Hardware Installation Guide (OL-17951- - Page 30
Preinstallation, Installation Options
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Preinstallation Chapter 2 Installing the Cisco MDS 9100 Series Send documentation comments to [email protected] Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017 Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Note Each new switch requires a license; see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide for instructions on installing a license. Preinstallation This section includes the following information: • Installation Options, page 2-2 • Installation Guidelines, page 2-3 • Required Equipment, page 2-4 • Unpacking and Inspecting the Switch, page 2-4 Installation Options The Cisco MDS 9100 Series can be installed using the following methods: • In an open EIA rack, using: - The rack-mount kit shipped with the switch - The telco and EIA Shelf Bracket Kit (an optional kit, purchased separately) in addition to the rack-mount kit shipped with the switch • In a perforated or solid-walled EIA cabinet, using: - The rack-mount kit shipped with the switch - The telco and EIA Shelf Bracket Kit (an optional kit, purchased separately) in addition to the rack-mount kit shipped with the switch Cisco MDS 9100 Series Hardware Installation Guide 2-2 OL-17951-02