HP Cisco MDS 9216A Cisco MDS 9100 Series Hardware Installation Guide (OL-17951 - Page 33
Installing the Switch in a Cabinet or Rack
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 2 Installing the Cisco MDS 9100 Series Installing the Switch in a Cabinet or Rack Send documentation comments to [email protected] Tip Keep the shipping container in case the chassis requires shipping in the future. Note If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtm Note The switch is thoroughly inspected before shipment. If any damage occurred during transportation or any items are missing, contact your customer representative immediately. To inspect the shipment, follow these steps: Step 1 Step 2 Compare the shipment to the equipment list provided by your customer service representative and verify that you have received all items, including the following: • Print documentation and CD-ROMs • Grounding lug kit • Rack-mount kit • ESD wrist strap • Cables and connectors • Any optional items ordered Check for damage and report any discrepancies or damage to your customer service representative. Have the following information ready: • Invoice number of shipper (see packing slip) • Model and serial number of the damaged unit • Description of damage • Effect of damage on the installation Installing the Switch in a Cabinet or Rack This section describes how to use the rack-mount kit provided with the switch to install the Cisco MDS 9100 Series into a cabinet or rack that meets the requirements described in Appendix A, "Cabinet and Rack Installation." Caution If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-5