HP Cisco MDS 9216i Cisco MDS 9100 Series Hardware Installation Guide (OL-17951 - Page 90
Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
SFP Transceiver Specifications Appendix B Technical Specifications Send documentation comments to [email protected] Table B-13 General Specifications for Cisco Gigabit Ethernet/Fibre Channel SFP Transceivers Description Short Wavelength Long Wavelength Connector type LC LC Wavelength 850 nm 1310 nm Fiber type MMF SMF Core size Cable distance1 50 microns 300 m 62.5 microns 9/125 microns 150 m 10 km Transmit power -1.5 to -9.5 dBm -3 to -9.5 dBm 1. Approximate; actual distance may vary depending on fiber quality and other factors. Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers Table B-14 provides the maximum environmental and electrical ratings for Cisco GE/FC SFP transceivers. Table B-14 Maximum Environmental and Electrical Ratings for Cisco GE/FC SFP Transceivers Parameter Symbol Min. Max. Unit Storage temperature1 Case temperature1, 2 Relative humidity1 TS -40 100 °C TC 0 85 °C RH 5 95 % Module supply voltage1 VCCT,R 3.1 3.5 V 1. Absolute maximum ratings are those values beyond which damage to the device may occur if these limits are exceeded for other than a short period of time. See Reliability Data Sheet for specific reliability performance. 2. Functional performance is not intended, device reliability is not implied, and damage to the device may occur over an extended period of time between absolute maximum ratings and the recommended operating conditions. Cisco CWDM SFP Transceivers Table B-15 lists the CWDM SFP transceivers available through Cisco Systems. These SFP transceivers are supported by the Cisco MDS 9140 and Cisco MDS 9120 Switch. Table B-15 Cisco CWDM SFP Transceivers Part Number Description DS-CWDM-xxxx Gigabit Ethernet and 1-Gbps/2-Gbps/4-Gbps Fibre Channel SFP LC interface xxxx where xxxx = 1470, 1490, 1510, 1530, 1550, 1570, 1590, or 1610 nm. DS-CWDM-MUX-4 Add/drop multiplexer for four CWDM wavelengths. DS-CWDM-MUX-8 Add/drop multiplexer for eight CWDM wavelengths. DS-CWDMCHASSIS Two-slot chassis for CWDM add/drop multiplexers. Cisco MDS 9100 Series Hardware Installation Guide B-8 OL-17951-02