HP Cisco MDS 9216i Cisco MDS 9000 Family Fabric Manager Configuration Guide - - Page 1237

Chapter 59 Configuring RMON Create RMON Alarms in Fabric Manager Send documentation comments to [email protected] Enabling 32-bit RMON Alarms for VSANs To enable an RMON alarm for one or more VSANs using Device Manager, follow these steps: Step 1 Step 2 Choose Admin > Events > Threshold Manager and click the Services tab. You see the Threshold Manager dialog box. Click the Services tab. You see the Threshold Manager dialog box with the Services tab for 32-bit alarm selecte as shown in Figure 59-8. Figure 59-8 Services Tab for 32-Bit Alarm Dialog Box Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Step 11 Click on the 32-bit radio button. Enter one or more VSANs (multiple VSANs separated by commas) to monitor in the VSAN ID(s) field. Use the down arrow to see a list of available VSANs to choose from. Check the check box in the Select column for each variable to monitor. Enter the threshold value in the Value column. Enter the sampling period in seconds. Choose a severity level to assign to the alarm: Fatal, Critical, Error, Warning, Information. Click Create. Confirm the operation to define an alarm and a log event when the system prompts you to define a severity event. If you do not confirm the operation, the system only defines a log event. Click More, then click the Alarms tab in the Threshold Manager dialog box to verify the alarm you created. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 59-9